Bogen TL100 Specifications

Input/Line
Transformers
Models WMT1A,
TL100 & TL600
WMT1A
Description
The Bogen Model WMT1A transformer is designed
especially for matching inputs from, or outputs to, a
600-ohm line.
As an input-matching transformer, it may be used to
connect telephone systems to most Bogen public
address amplifiers for telephone paging. It also func-
tions as an output-matching transformer in feeding
program material over a 600-ohm telephone line for
"music-on-hold". It is compatible with any amplifier
having a 25V output terminal.
WMT1A
Features
• Hi-Z, 10k-ohm primary impedance
• Lo-Z, 600-ohm secondary impedance, balanced
with center tap
• Matches high-to-low impedance or low-to-high
impedance
• Adapts line level signals to microphone inputs
• RCA connector for Hi-Z side
• Screw terminals for Lo-Z side
• Small steel enclosure w/mounting ears allows
easy mounting anyplace
• No wiring or soldering required
WMT1A
TL100 ,TL600
The Bogen Models TL100 and TL600 transformers
are compact plug-in units especially designed for use
with power amplifiers.
The TL100 provides a balanced one-to-one input
match and isolation; its primary impedance will be
the same value as total termination of the input
impedance to the amplifier(s).
Model TL600 matches the output of a 600-ohm tele-
phone line to a Bogen power amplifier input.
TL100 and TL600
• Provides balanced 600-ohm or bridging input for
power amplifier
• May be used to provide a 600-ohm output from
a Bogen mixer-pre-amplifier
• Transformer connections terminated in a keyed
nine-pin miniature plug
• Compact, plug-in design
• Internal mumetal shielding
Specifications subject to change without notice.
© 2002 Bogen Communications. Inc.
Part No. 54-7775-02R2 Printed in USA 0212
TL100/TL600