Night & Day Furniture Ginger Twin Full Bunk Bed Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Night & Day Furniture Manuals
  4. Indoor Furnishing
  5. Ginger Twin Full Bunk Bed
  6. Assembly instructions manual

Night & Day Furniture Ginger Twin Full Bunk Bed Assembly Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SAFETY WARNING
!
1.
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove warning label from bed.
2.
Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
3.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4.
Do not allow children under 6 years of age to use the upper bunk.
5.
Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
6.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7.
Prohibit more than one person on upper bunk.
8.
Always use the ladder for entering and leaving the upper bunk.
9.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10.
Use of a night light may provide added safety precaution for a child using the upper bunk.
11.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
12.
The use of water or sleep flotation mattresses is prohibited.
13.
STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to hooks, belts
and jump ropes.
14.
Keep these instructions for future reference.
SIZE OF MATTRESS AND FOUNDATION:
Use only mattress, which is 37 1/2" - 38 1/2" width and 74"-75" long on upper bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6" and that the mattress surface is at
least 5" (127mm) below upper edge of guardrails.
WARNING:
Adult Assembly Required. This package contains small parts. Keep away from children.
Replacement Parts:
Replacement parts, including additional guardrails may be obtained from any
Night & Day Furniture Dealer.
Certified:
This bunk bed conforms to all applicable consumer product safety standards
16 CFR PARTS 1213, 1500, 1513 and ASTM F-1427
Page 1 of 9
A s s e m b l y I n s t r u c t i o n s
Ginger Twin Full Bunk Bed
TM
N&D 0809

Advertisement

Table of Contents
loading

Related Manuals for Night & Day Furniture Ginger Twin Full Bunk Bed

Summary of Contents for Night & Day Furniture Ginger Twin Full Bunk Bed

  • Page 1 A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0809 SAFETY WARNING Follow the information on the warnings appearing on the upper bunk end structure and on the carton.

  • Page 2: Table Of Contents

    A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 1109 Parts in Box 1 Parts in Box 5 Hardware in this Box. Note: No Holes!

  • Page 3: Lower Bunk

    A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0808 Attach Stretchers and the Middle Rail to the Lower Bunks. Please Note: Fit Wood Dowels to the Stretchers.
  • Page 4 A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0207 Fit the Long Slats between the Stretchers. Fix the Remaining Slats with screws.
  • Page 5 A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0808 Attach the Stretchers and Rear Guard Rail to the Upper Bunks. Bolt and Barrel Nut Assembly.

  • Page 6: 30Mm Bolts X 19 X

    A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0808 Attach the Front Guard Rail to the Upper Bunk. Tap Wooden Dowels into the ends of the Front Guard Rail. Use the 90mm Bolts and Barrel Nuts fix it in place.

  • Page 7: 40Mm Threaded

    A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0207 Bolt the short Slats to the Stretchers. Fix the Remaining Slats with screws.

  • Page 8: Metal Tubes

    A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0207 Fit the Upper Bunk onto the Lower Bunk. Fit the Brackets to the Legs.
  • Page 9 A s s e m b l y I n s t r u c t i o n s Ginger Twin Full Bunk Bed N&D 0207 Attach the Ladder to the Upper Stretcher. Finally, hook on the Ladder onto the Upper Stretcher.

Table of Contents