Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Flexitron WebdynEasy W M-Bus
Summary of Contents for Flexitron WebdynEasy W M-Bus
- Page 1 USER MANUAL WebdynEasy W M-Bus 868MHz Collect Wireless M-Bus data...
-
Page 2: Table Of Contents
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Contents Additions on Field L for B format frames ............7 Details on the data parameter F and on the diagnostic mode, adjustment of the / scheduleRadio / data range ..............7 Presentation ...................... - Page 3 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 3.1.1.3 RUNmode ..................34 3.1.1.4 RESET ................... 35 3.1.2 Application operation ................35 3.1.2.1 WM-BUS task ................. 36 3.1.2.2 Modem task (connection to the IS) ..........36 3.1.2.3 Monitoring task ................36 Configuration .....................
- Page 4 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Update ....................... 75 Local ......................77 Remote ....................... 77 Tools & diagnostics ................... 78 Support ......................80 FAQ ........................82 APPENDICES ....................84 10.1 Appendix A: Configuration - Variable list ............ 85...
- Page 5 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Glossary Name Description Access Point Name The name of the access point the gateway uses to connect to the Internet via a mobile connection. Advanced Encryption Standard – Synthetic encryption algorithm. Bluetooth Low Energy...
- Page 6 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz JSON is an easily interpretable data exchange format. Long Term Evolution - Machine LTE-M/CAT- 4G mobile network specific to connected objects, i.e. low consumption and long range. Network Time Protocol An NTP server makes it possible to time synchronise equipment.
-
Page 7: Additions On Field L For B Format Frames
This guide describes all features of the WebdynEasy W M-Bus W M-Bus product. Its purpose is to help operators install and configure their WebdynEasy W M-Bus W M-Bus and to allow operating entities to include the collected data in their IS. -
Page 8: Presentation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Presentation Version 1.5... -
Page 9: General Description
868MHz 1.1 General description The purpose of the WebdynEasy W M-Bus W M-Bus hub is to collect data from Wireless M- Bus sensors such as meters (water, gas and electricity) and sensors (temperature, humidity, etc...). This technology is energy-efficient, the hub battery service life can exceed 10 years. - Page 10 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Meters or sensors WebdynEasy Exploitation FTP Server Option without encryption 2G/LTE-M Format BSON Option with encryption C1 …Cy BSONOption sans chiffrement 2G/LTE-M Format BSON + AES WebdynEasy 2G/LTE-M FTP server Operation Bluetooth (BLE)
-
Page 11: The Interfaces
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 1.3 The interfaces HALL effect sensor Buzzer Mini-USB connector Indicators: LED 1: reserved LED 2: reserved LED 5: Modem status 868MHz radio SMA antenna Box output for the 868MHz radio external antenna (optional) -
Page 12: Supported Equipment
Product: References Descriptions WG0612-A12 WebdynEasy W M-Bus W M-Bus Accessories: References Descriptions AC0803-01 Battery pack 7.2V / 14Ah Webdyn proposes factory preconfiguration services for your WebdynEasy W M-Bus W M-Bus. Please contact our sales department for further information. Version 1.5... -
Page 13: Technical Specifications
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 1.6 Technical Specifications 1.6.1 General specifications Specifications Descriptions Power supply +12V Battery 7.2V 14Ah lithium battery pack (non- rechargeable) - in optimal configuration, the battery can last up to 10 years Consumption... -
Page 14: Technical Specifications
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 1.6.2 Technical specifications Specifications Descriptions Flash: 1.5MB (circular operation) Memory capacity for data 2000 frames per listening window Radio interference Frequency: 868 MHz Antenna: Internal SMA (external as an option) -
Page 15: Software Specifications
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz LTE-M - Band 27 807 MHz – 824 MHz LTE-M - Band 28 703 MHz – 748 MHz LTE-M - Band 66 1710 MHz – 1780 MHz LTE-M - Band 85 698 MHz – 716 MHz 2402 MHz –... -
Page 16: Safety Instructions
Please follow all the safety instructions featured in the equipment documentation. The WebdynEasy W M-Bus W M-Bus product can be damaged by electrostatic discharges (ESD) When the equipment is open, do not carry out any operations other than those described in this manual. -
Page 17: Regulations
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz To optimise radio and cellular modem reception sensitivity, it is imperative to leave 20 cm free space around the antennas. 1.8 Regulations The product complies with the European directives according to the EU Declaration of Conformity available from Webdyn or on website: www.webdyn.com... -
Page 18: Installation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Installation... -
Page 19: Prerequisite
868MHz 2.1 Prerequisite Since the role of the WebdynEasy W M-Bus W M-Bus hub is to send the data it collects to an IS, the installation requires sufficient knowledge of the hub, but also of the information system to which it sends its data. - Page 20 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz A unique identifier called UID is assigned to each WebdynEasy W M-Bus W M-Bus. It is used to configure the product and recognise it when you have several WebdynEasy W M-Bus W M- Bus products.
-
Page 21: Assembly
2.4.1 Product power supply 2.4.1.1 External power supply The WebdynEasy W M-Bus W M-Bus hub can be powered using 12V DC with or without a battery pack connected. Power is supplied from terminal block J8 on the left side of the battery pack. -
Page 22: Battery Pack
10 watts. 2.4.1.2 Battery Pack The WebdynEasy W M-Bus W M-Bus hub has a Lithium battery that can keep the product running for 10 years. The hub includes a gauge that provides a battery consumption estimate as soon as it is installed. -
Page 23: Radio
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Battery Pack Battery connector Battery location Cable clamp passage Never install battery packs that are not new. Once a battery pack is installed, never disconnect it except to replace it. CAUTION, THERE IS A RISK OF EXPLOSION IF THE BATTERY PACK IS REPLACED BY A BATTERY PACK OTHER THAT RECOMMENDED BY WEBDYN. -
Page 24: Cellular Network
To do this, unscrew the cap on the box and fit a M16*1.5 cable gland (not included). If the WebdynEasy W M-Bus W M-Bus hub were to be installed in a metal box or in a location that does not have proper signal reception, the use of a remote antenna is strongly recommended. -
Page 25: Sim Card
The hub is compatible with all market operators as well as with all mini SIM 2FF 25 x 15mm format SIM cards. To check that the WebdynEasy W M-Bus W M-Bus is operating properly, insert a SIM card with the following specifications: ... -
Page 26: Indicators & Buttons
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz SIM card To insert the SIM card into the product, slide the holder flap to the right (in the OPEN direction). Slide the SIM card into the flap. Then close the flap by sliding it to the left (in the LOCK direction) Webdyn does not supply any SIM cards. - Page 27 Led 1 RESET button 2.4.4.1 Hall Effect Sensor The WebdynEasy W M-Bus W M-Bus hub is equipped with a Hall effect sensor that activates when a magnet is passed over the top of the box. Magnet passage area The Hall effect sensor is used for various actions such as: ...
-
Page 28: Reset Button
1. Switch the WebdynEasy W M-Bus W M-Bus to RUN mode. 2. Connect the hub to a computer using a USB cord (A male - mini B male type). 3. A new drive called "WebdynEasy W M-Bus W M-Bus" will appear on the computer (like a thumb drive) 4. -
Page 29: Bluetooth Interface (Ble)
You could damage the file system and corrupt the loaded files. If the removable drive is inaccessible, you must format it as FAT32. 2.4.6 Bluetooth interface (BLE) The hub Bluetooth interface (BLE) is used by the "WebdynEasy W M-Bus W M-Bus" mobile app to: configure ... -
Page 30: Product Operation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Product operation Version 1.5... -
Page 31: Starting The Product
868MHz 3.1 Starting the product By default, the WebdynEasy W M-Bus W M-Bus hub is shipped in either: STORAGE mode: if the product is delivered with a customer configuration FACTORY SETTINGS mode: if the product is delivered without a configuration. - Page 32 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The state machine below shows the 3 modes, the mode change conditions, and the beeps for each mode. 1 x magnet 1 x magnet Configuration FACTORY 2 short beeps STORAGE 1 short beep...
-
Page 33: Factory Settings Mode
To reactivate the interfaces, a new configuration phase will need to be launched. The required mode can be set when configuring the product. To find out whether the WebdynEasy W M-Bus W M-Bus has a customer configuration, check the product's commercial reference. (see section 2.2.2: Identification) 3.1.1.2 STORAGE mode... -
Page 34: Runmode
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz To find out whether the WebdynEasy W M-Bus W M-Bus has a customer configuration, check the product's commercial reference. (see section 2.2.2: Identification) 3.1.1.3 RUNmode RUN mode runs the product in its end use mode. It is used to regularly run the collection of WM-BUS data from the sensors and to connect the modem to upload the data to the server. -
Page 35: Reset
3 short beeps if the connection with the server was successful. 3.1.1.4 RESET The WebdynEasy W M-Bus W M-Bus has 2 RESET functions that can be triggered using the RESET button (see section 2.4.4.2.: “RESET button). RESTART of the product ... -
Page 36: Application Operation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz To find out whether the WebdynEasy W M-Bus W M-Bus has a customer configuration, check the product's commercial reference. (see section 2.2.2: Identification) 3.1.2 Application operation In RUN mode, the product carries out 3 tasks which are: ... - Page 37 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz product temperature: temperature measurements are taken and recorded in the supervision file. The maximum temperature not to be exceeded can also be configured. the product battery level: the minimum battery level percentage can be defined.
-
Page 38: Configuration
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Configuration Version 1.5... -
Page 39: Local Configuration
FTP server without the need for a local configuration beforehand. 4.1 Local configuration To configure the WebdynEasy W M-Bus W M-Bus locally, the hub must be in RUN or FACTORY SETTINGS mode. Local configuration can be by: ... - Page 40 To synchronise the mobile app with the hub using Bluetooth, follow these steps: 1 Pass the magnet over the product. (see section 2.4.4.1: “Hall Effect Sensor”) 2 Activate Bluetooth on the smartphone. 3 Launch the "WebdynEasy W M-Bus W M-Bus” smartphone app 4 Click "SCAN"...
-
Page 41: Configuration File
To avoid file alteration during exchanges, a CRC32 is included in each file. See section 5.1.1.4: “File Format” The WebdynEasy W M-Bus W M-Bus hub configuration file is in BSON format and its format is as follows: “<uid>-config.bson” Presentation The hub has a default configuration. -
Page 42: System
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz It is possible to reuse the configuration file deposited by the concentrator. To do this, it is important to rename the “<uid> -cfg.bson” file to “<uid> - config.bson”. 4.2.1 System The product operating mode, the hub name and the log level can be modified. -
Page 43: Security
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 2: request command blePin Bluetooth BLE identification code (default: “1234”) whiteList List of phone numbers authorised to issue commands (default: NULL, all numbers are authorised) testCount Number of diagnostic command sequences in a row between 1... -
Page 44: Wm-Bus Radio
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz If the verification of the CRC of the file (cfg, cmd, …) fails, the reading of the file is stopped and an error is announced the acknowledgement file ACK deposited in the directory «... -
Page 45: White List
The white list is a BSON file that is uploaded as a configuration file for the hub. The white list accepts up to 2000 WM-Bus identifiers. The WebdynEasy W M-Bus W M-Bus hub white list file is in BSON format and its format is as follows: “<uid>-wlFilter.bson”... -
Page 46: Field L For B Format Frames
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The hub white list table is in the "wlFilter" object, then each device is in the "id" object stored in binary format (type 0x00 in JSON) in JSON. The equipment contains 8 bytes for the WM-... -
Page 47: Hub Connectivity
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz By default, the gateway modifies the B format frame L field so that it is the same as for an A format frame. Frame processing then becomes identical regardless of the format. -
Page 48: Ftp/Ftps
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz When the modem mode is in auto mode, the modem connects by default in LTE-M then if this one is unavailable, it falls back to 2G. Example: Using a JSON file (to be converted to BSON format for the hub): "config":... -
Page 49: Ntp
"pass": "1234", "dir": "/site1234" "crc": 4.2.3.3 NTP The hub regularly synchronises its time with an NTP server. WebdynEasy W M-Bus W M-Bus uses the date and time in UTC+0 format. Parameters Description IP address or NTP server name (64 characters max) (Default address: "time.google.com"... -
Page 50: Schedule And Monitoring
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Parameters Description oneAlarmPerDay Only one alarm transmission per modem per day: true: sends at most one alarm transmission per day (default) false: transmission of all alarms during a day. temperature Maximum temperature in degrees (°C) before an alarm is triggered (between 10 and 50) null or 0: disables the temperature alarms. - Page 51 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Where: : represents the minutes (from 0 to 59) represents the hour (from 0 to 23) : represents the day of the month (from 1 to 31) : represents the month (from 1 to 12) ...
- Page 52 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz mm hh dd MM DD data Radio listening window duration in seconds (between 30 and 3600) If the "data" listening window is not entered, then the listening window duration will be the one defined in “configradioduration” (see section 4.2.2: “WM-Bus radio”)
-
Page 53: Monitoring
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 4.2.5.1.2 FTP Schedule The FTP schedule is used to upload files to the FTP server and synchronise the product clock. The FTP Schedule timer triggers are in the "scheduleFTP" object in JSON. The maximum number of timer triggers is 8. - Page 54 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Parameters Description monitoringPeriod Hub monitoring period in minutes (between 15 and 1440) (60 by default) null or 0: disables monitoring If monitoring is disabled, this greatly impacts temperature and battery alarm monitoring, as temperature and battery data acquisition will only be carried out when a radio or FTP Schedule is triggered.
-
Page 55: Operation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Operation Version 1.5... -
Page 56: The Remote Server
WebdynEasy W M-Bus W M-Bus hub is correctly configured to upload and synchronise its configuration on an FTP server. 5.1.1.2 Server tree structure The FTP server must have a tree structure specific to the WebdynEasy W M-Bus W M-Bus product. Version 1.5... - Page 57 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Below the root directory, the FTP server must have the following directories: Name Rights Description /CONFIG Write Contains the configuration image. The configuration uploaded by the hub is in the following format: “<uid>-<timestamp>-config.bson”...
-
Page 58: Operation
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The minimum access rights to the different directories must be defined as specified in the table above. If the directories on the FTP server do not exist the first time the hub connects, it will create them. -
Page 59: The Configuration
5.2 The configuration The hub allows configurations using a . Configuration file: The WebdynEasy W M-Bus W M-Bus hub configuration file is in BSON format and the file name format is as follows: “<uid>-cfg.bson” A backup of the current configuration is available on the remote server in the "/CONFIG"... -
Page 60: The Data
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 4. Upload the acknowledgement file in the "ALARM" directory. A pre-defined name must be used for the configuration file “<uid>-cfg.bson”. Once the new configuration has been applied, an acknowledgement file containing the result of the new configuration application is uploaded to the server. - Page 61 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The frequency at which files are sent to the remote server can be defined by an FTP Schedule (see section 4.2.5.1.2: “FTP Schedule”). However, when connecting to the server following the launch of a diagnostic, the hub takes advantage of the connection to upload the data in its memory.
-
Page 62: Alarms
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz "uid": "WE_1234", "source": "schedule", "TS": 1560068897, "frameCount": 2, "data": [ "T": 1560066602, "R": 199, "F": "$type": "80", "$binary": "fAviGIskafDwA4E0UkO26w==" "T": 15600645887, "R": 178, "F": "$type": "80", "$binary": "+plAP1iAwE0df2KBY1N7Iodr/LAFS2CrXTrUsY3wy731VN113/9UmO\CiglwR" "crc": 5.4 Alarms Alarms are uploaded to the " /ALARM " directory on the FTP server in BSON format. -
Page 63: Ack Acknowledgements
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Parameters Description type Alarm type: temperature, battery or ntp value Value of the item of data that triggered the alarm. Example of an alarm file converted to JSON: "uid": "WE_1234", "source": "alarm", "TS": 1560068897,... -
Page 64: Commands
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Parameters Description type Command type corresponding to the acknowledgement cmd: command config: configuration update Command identifier corresponding to the acknowledgement result Command result: ok: command or update successfully processed ko: error processing the command or the update... - Page 65 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz All commands accept two optional parameters "uid" and "cid": uid: unique hub identifier cid: command identifier Commands will be rejected if the included uid parameter does not match the hub uid.
-
Page 66: Request" Command
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 5.6.1 “Request" command The "request" command triggers the immediate connection of the product to the remote server, making it possible to upload data, the configuration and the supervision, but also to download the files present in its INBOX. -
Page 67: Diag" Command
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The "status" command is used to retrieve product status information. When the request is made using a file, a status file is uploaded to the remote server "/SUPERVISION" directory. No subcommands or parameters are required for this command. -
Page 68: Whitelisterase" Command
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz "cmd": { "type": "configGet" "crc": 5.6.7 “whiteListErase” command The "whiteListErase" command is used to erase the WM-Bus radio white list. No subcommands or parameters are required for this command. Example: Using a JSON file (to be converted to BSON format for the hub): "cmd": {... -
Page 69: Logclean" Command
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz "cmd": { "type": "logGet" "crc": 5.6.10 “logClean" command The "logClean" command is used to clear the log files. No subcommands or parameters are required for this command. Example: Using a JSON file (to be converted to BSON format for the hub): "cmd": {... - Page 70 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz <uid>: Hub identifier <timestamp: Number of seconds elapsed since January 1 , 1970 at midnight UTC precisely. Example: 123456-1591083697-supervision.bson Supervision files are uploaded when connecting to the FTP server. The supervision file consists of the following elements:...
- Page 71 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz radio Total number of wake-ups by the radio Schedule Total number of wake-ups by USB Number of watchdog triggers fault Number of fatal errors dates lastConfig Timestamp of the last configuration update (optional)
- Page 72 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Example of a supervision file converted to JSON: Version 1.5...
- Page 73 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz "uid": "WE_1234", "source": "schedule", "TS": 1598349735, "supervision": { "identity": { "uid": "WE_1234",, "name": "1234", "SN": "SN20200423_9876543210" "version": { "hw": 11, "sw": "01.04", "swBle": "0.1", "swModem": "BG95M3LAR02A03_01.005.01.005" "uptime": { "run": 85484, "radio": 69090, "modem": 5873,...
-
Page 74: The Log
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 5.8 The Log The logs are uploaded to the " /SUPERVISION " directory on the FTP server, in BSON format. Below is the supervision file name format: <uid>-<timestamp>-log.bson Where: <uid>: Hub identifier ... - Page 75 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Example of a log file converted to JSON: "uid": "WE_1234", "source": "schedule", "TS": 1560068897, "log": [ "T": 1598348100, "C": 33554432, "D": "[APP][appModeInit():133]mode: run" "T": 1598348100, "C": 33554432, "D": "[APP][appRun():27]run application" "T": 1598348100, "C": 3,...
-
Page 76: Update
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Update Version 1.5... - Page 77 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz The WebdynEasy W M-Bus W M-Bus hub can be updated locally via USB or remotely via FTP. The product has 2 firmwares. One for the application part and the other for Bluetooth BLE management.
-
Page 78: Local
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Example of Bluetooth (BLE) firmware update: Using a JSON file (to be converted to BSON format for the hub): "cmd": { "type": "update", "data": "WebdynEasy_BLE_V1.0.bson" "crc": 6.1 Local To update the hub locally, connect the USB cord between the hub and a computer and then follow the file download procedure (see section 4.1.1: “USB”). -
Page 79: Tools & Diagnostics
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Tools & diagnostics Version 1.5... - Page 80 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz BSON-JSON and JSON-BSON conversion tools: To facilitate the conversion of JSON and BSON files, Webdyn has created a JSON-BSON and BSON-JSON converter. It can be used in silent mode (using a console) or through a HMI.
-
Page 81: Support
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Support Version 1.5... - Page 82 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz If there are technical problems related to our products, contact WEBDYN support: Webdyn SA 26 Rue des Gaudines 78100 Saint-Germain-en-Laye Phone: +33 1 39 04 29 40 email support@webdyn.com https://www.webdyn.com Please have the following elements to hand: ...
-
Page 83: Faq
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 9 FAQ Version 1.5... - Page 84 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz Why has the hub stopped uploading files to the FTP server? Please check these items in this order: the battery level: if the battery level is too low or empty, the product will not run properly or not run at all.
-
Page 85: Appendices
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 10 APPENDICES Version 1.5... -
Page 86: Appendix A: Configuration - Variable List
USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz 10.1 Appendix A: Configuration - Variable list All the "names +tree structures" highlighted in blue are lists and can be created multiple times. Name + tree structure Description Type Default Information value... - Page 87 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz false: file encryption disabled /security/key AES128 CBC Key Hexadecimal 16 bytes null /local/magnet Configuration of the magnet action in RUN mode List: 0: Bluetooth BLE + Modem 1: diagnosis ...
- Page 88 USER MANUAL – WebdynEasy W M-Bus 868MHz 868MHz mm: represents the minutes (from 0 to hh: represents the hour (from 0 to 23) dd: represents the day of the month (from 1 to 31) MM: represents the month (from 1 to ...