Contents Upload; Computer Convert - Hologram Z200 User Manual

Install the blades
3
Install the LED blades into
the blade's slots, tighten the
screws. (In order to protect
the LED blades, install and
remove should be softly)
Connect the power cable
4
Connect the power cable and
hang on the 3D LED FAN.
Fixed the host
5
Fix the screw between the
bracket and 3D LED FAN to
prevent fall off.
● The product works in a state of high speed rotation. Do make
sure the device is installed on the place not touchable,
or it must need a protection cover to ensure personal safety.

Contents Upload

1. Computer Convert

After the video file is converted by using the transcoding
tool " XMediaRecode", copy to the TF card and it can
be played normally.
● Video file format is complex and diverse, need to transcode
to be able to play normally.
● TF card comes with this software of each 3D fan, please
copy to the computer to use.
● Due to software upgrades and updates, please check the
software user guide for detailed information.
4