Download Print this page

Maxton Spoiler Cap Installation Manual

d e s i g n. c o m

Place the extension cap to the spoiler for the initial ﬁtment.

Place masking tape on the car spoiler at the extension

cap edges that will be used for marking the placement of the

part.

Use measuring tape to ﬁnd even distances from the

reference points of your car to the edges of the extension cap

(ask for assistance to hold part in place while taking

measurement)

Make sure that distances measured from the left and the right

side are equal.We do not recommend ﬁnding the center point

of the extension cap and the spoiler since it will make correct

ﬁtment more difﬁcult.

Outline the edges of the extension cap on the

masking tape.

Put the extension cap to the side.

Use provided degreasing cloth to clean the spoiler prior

installation.

Remove 2-3cm of the foil from the double sided mounting

tape at the edge of the extension cap.

Spoiler Cap

Cap Spoiler

Installation Manual

1+2

Table of Contents

Need help?

Do you have a question about the Spoiler Cap and is the answer not in the manual?

Page 1 Spoiler Cap Cap Spoiler d e s i g n. c o m Installation Manual Installation Manual Place the extension cap to the spoiler for the initial ﬁtment. Place masking tape on the car spoiler at the extension cap edges that will be used for marking the placement of the part.
Page 2 Maxton Design Maxton Design d e s i g n. c o m maxtondesign_ofﬁcial Place the extension cap at the both points that you marked on the masking tape (as described in point 4 of this manual). Slowly remove the rest of the foil from the double sided mounting tape holding extension cap in the marked place of ﬁtment and applying pressure (ask someone for assistance to...