Parts List - Homak First Watch HS10131310 Owner's Manual & Operating Instructions

PARTS LIST:

• (2) Keys
Only For Model: HS10131813
Getting Started:
1. 4 AA Batteries required to operate the electronic keypad (not
Included).
2. Two seperate personal user codes can be programmed for
this safe.
3. A green light should fl ash when entering the user code.
4. After twenty seconds of no action, the keypad resets its self and
is ready to accept the full user code again.
5. If the personal user code surpases eight digits, then the ninth
digit becomes the confi rmation button.
6. Remove the small black plastic cap on keypad to expose
mechanical override lock.
7. Mechanical Override needs to be in locked position for the
keypad to function properly.
8. Safe is not locked until the green light turns off.
• Multi-Strand Braided Steel Cable
Push Down
Insert nub end of steel
cable into the hole to the left
of the safe
- 2 -