Advertisement
Quick Links
Warranty
CruzPro products are carefully tested and
adjusted at the factory before shipping and
are warranted for one full year against
original defects in materials or
workmanship.
This warranty does not
include damage to the product resulting
from accident, misuse or neglect.
If the product should become defective
within the warranty period, we will repair
or replace it free of charge, including free
return transportation, provided it is
delivered prepaid to the dealer from whom
it is originally purchased.
This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state, or country
to country.
Programming Alternator Size
0-46
47-61
62-81
Amps
Amps
Amps
109-144
145-192
193-257
Amps
Amps
Amps
Programming Battery Size
0-99
100-144
145-210
A-H
A-H
A-H
307-446
447-651
652-950
A-H
A-H
A-H
Page 14
O
w
n
e
r'
s
Handbook
82-108
Amps
Summary and Warnings . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 4
258-344
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 7
Amps
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming the Jumpers . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
211-306
A-H
951-1387
A-H
Table of Contents
Page 3
Advertisement
Related Manuals for CruzPro SAR20
Summary of Contents for CruzPro SAR20
- Page 1 Warranty CruzPro products are carefully tested and adjusted at the factory before shipping and are warranted for one full year against original defects in materials or workmanship. This warranty does not include damage to the product resulting from accident, misuse or neglect.
- Page 2 RPM/Engine Hours/Elapsed Time Gauge To energize an Equalization cycle: When l Digital Oil Pressure Gauge/Alarm the SAR20 indicator LED blinks 3 times per l Digital Water Temperature Gauge/Alarm 2 seconds (float mode) you can start an l Digital Amps Gauge...
- Page 3 Now check your wiring carefully. After you are equalization voltage has been reached, 4 hours, or sure there are no errors in the wiring, program the manually by pressing the front panel button for jumpers as described on page 13 and 14. four seconds, whichever occurs first.
- Page 4 b) Connect the power ground terminal to the rated alternator to 80% of maximum after 15 minutes. battery negative distribution post. With the heavy loads being demanded by the c) Connect the positive sense line (D) directly to electrical and electronic conveniences found on the battery positive terminal through a 5 amp fuse many boats it's becoming more common for a located near the battery.
Need help?
Do you have a question about the SAR20 and is the answer not in the manual?
Questions and answers