Balboa CHROMAZONE User Manual page 18

42367_rev A
TOTAL: RED LIGHTS
Zone A
TOTAL: GREEN LIGHTS
TOTAL: BLUE LIGHTS
TOTAL: ZONE A LIGHTS
TOTAL: RED LIGHTS
Zone B
TOTAL: GREEN LIGHTS
TOTAL: BLUE LIGHTS
TOTAL: ZONE B LIGHTS
TOTAL: RED LIGHTS
Zone C
TOTAL: GREEN LIGHTS
TOTAL: BLUE LIGHTS
TOTAL: ZONE C LIGHTS
TOTAL: ZONES A + B + C
Find navigation to the
on page 6.
What does
It test the electrical load of all the LEDs in all zones
connected to
Test to make sure the total
amperage draw of all the LED lights does not exceed
a total load of 90%.
varies by type of lighting used. The output trip current
is limited to 1.6A at 12V out or 2.8A at 5V out.
Press this button (A) to run a test.
The test is complete when all the blank fields
are populated. In this example, the total amperage
draw is 27% (B). The total amperage draw needs to
be 90% or less.
The Test screen shown above is included with panel software
version 1.03. The Test screen may look/function differently on
earlier software versions.
TEST
Test screen
Test do?
(C) . Perform a
's current limit
User Guide | spaTouch
TM
B
C
View page 4 for a
detailed diagram
Balboa Water Group | Your Single Source Solution
18
3
TM
A