Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BlueTrek X3
Summary of Contents for BlueTrek X3
- Page 1 User Manual...
- Page 2 -You must charge it continuously for about 4 hours, until the red indicator light turns off. Please refer to the “Charging the BLUETREK® X3®” section of this manual. -Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® X3” section of this manual.
- Page 3 Charging the BLUETREK® X3 Please connect the charger to the headset and to the main. During the charge, the indicator light is red. The indicator light will turn off when the charge is complete. During subsequent charges, the charging should take approximately 3 hours.
- Page 4 • Do not charge your headset for more than 10 hours. • The use of any other charger will automatically suspend the warranty. It is strictly forbidden and can be very dangerous. 3 I BLUETREK X3...
- Page 5 A beep (2 tones) can be heard in the speaker then release the TALK button. Pairing the BLUETREK® X3 Before using the BLUETREK® X3 headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.
- Page 6 And a sound can be heard in the speaker. Once the mobile phone detects the headset, a “BLUETREK X3” message will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes”...
-
Page 7: Making A Call
This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more. Answering a call When the headset rings, press once on the TALK button to take the call. -
Page 8: Adjusting The Volume
To end the mute function When the microphone is muted, quickly press the VOL+ button on the BLUETREK® X3. The periodic tone will end. Transferring a call from BLUETREK® X3 to the mobile phone With a phone in Headset Profile During an active call, to transfer it to the phone, simply turn off your headset. -
Page 9: Call Waiting
Transferring a call from the mobile phone to the BLUETREK® X3 With a phone in Headset Profile Switch on your headset. With a phone in Hands-Free Profile During an active call on the mobile phone, press the TALK button for about 2 seconds to transfer the call. - Page 10 Wearing the BLUETREK® X3 Two different sizes of ear hooks are included in the pack to suit your ear size. Fitting the Ergobud* 4 different sizes of Ergobud* are included in the pack to suit your ear size. You can adjust the Ergobud position that you feel the most comfortable.
- Page 11 • Check the regulation in your area if you plan to use your headset while driving. • Turn off your headset before boarding an airplane. • CAUTION: Danger of explosion if battery is incorrectly replaced. Dispose of batteries according to local regulations. Do not dispose as household waste. BLUETREK X3 I 10...
-
Page 12: Troubleshooting Guide
The first thing you should do when encountering a problem that you cannot solve with this manual, is to switch off your headset and your mobile phone, and switch them on again. To find out more, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. 11 I BLUETREK X3... - Page 13 www.bluetrek.com...