BlueTrek G2 User Manual page 5

Before using Bluetrek
• Charge the headset; please refer to the "Charging Bluetrek
• Pair the headset with a mobile phone. Please refer to the "Pairing Bluetrek
manual.
1. Charging Bluetrek
Your headset is delivered uncharged. So before the first use, you must fully recharge it for about 8
hours with the supplied charger, until the blue indicator light turns on. The use of any other charger
will automatically suspend the warranty. During subsequent charges, the charging should take
approximately 1 hour 45 minutes.
Please connect the charger to the headset and to the mains. During the charge, the indicator light
is either red if your headset battery was excessively discharged, or purple during a normal charge.
The indicator light will turn to blue when the charge is complete.
When you hear a light beep in your headset at regular intervals, and the indicator light flashes in
red, your headset needs to be recharged.
To maximize battery lifetime, it is recommended to recharge your headset to full capacity only
when the battery is low, since a battery has a lifetime of about 500 charging cycles.
If you leave your headset battery empty for an extended period of time, it could excessively dis-
charge the battery. In this case, you may have to charge your headset for 10 hours or more until
the battery recovers and recharges completely. The indicator light will be red at the beginning of
the charge to recover the battery capacity, then it will turn to purple for the normal charging process.
Only switch on the headset once the blue indicator light turns on, indicating the battery has fully
recovered.
Do not let the battery charger remain plugged in the headset for more than 24h.
5 l Bluetrek G2 user guide
® G2 headset, you must:
®
G2
® G2" section of this user guide.
® G2" section of this