Rutland County Garden Furniture Rutland workbench with back board Assembly Instructions

Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.

Package contents

1 x Bench top
1 x Bench shelf
2 x Front legs
2 x Back panel legs (1435mm) (1)
2 x Back panel rails (2)
6 x Back panel slats (3)
2 x Back panel dividers (230mm) (4)
Assembly Instructions
Rutland workbench with
Rutland workbench with back board
back board
2 x Diagonal rear braces
4 x Spacer blocks
65mm screws
M8 Coach screws

Tools required

10mm socket or spanner
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
1