BorMann Technik BBC8500 Owner's Manual page 3

A: OPERATION GUIDANCE
Indicator Lights
Press the switch button to check the capacity of Jump Starter
When charging, indicator lights will flash one by one. The number of solid indicator lights indicates the battery capacity. Full
indicator lights are solid when charging is paused or completed.
Charging for Jump Starter itself:
1. Plug the DC adaptor into the universal socket
2. Connect 15V 1A input port of Jump Starter to the end of DC adaptor.
Or
1. Plug Male Cigarette lighter into your car.
2. Connect 15V 1A into port of Jump Starter to the end of car adaptor.
To Jump start 12V vehicles
1. Make sure the jump starter's battery has enough capacity (at least 3 lights on)
2. Insert the blue plug of the jumper cables into the jump starter 3. Connect red clamp to the positive (+) battery terminal
firstly; then connect black clamp to the negative (-) battery terminal.
For power supply to 12V Automobile electronic appliances
1. Plug the optional switch cable to 12V 2A output port.
2. Connect the optional switch cable and 12V appliances electronics.
3. Press the switch button to power supply.
LED Light
Press the power button 3 seconds to start the LED light and then 4 modes of LED light appear in sequence
(normal/strobe/SOS/off) if you press lightly.
B: Parts List (may differ depending on the model purchashed)
C. FAQ:
Q: How to turn off this appliance?
A: This appliance will power off automatically when no loading or charging is completed
Q: How long will this appliance charge my mobile phone fully? A: Approx. 1 hour.
Q: How long will this appliance on a full charge to supply the Notebook?
A: 2-3hours.
3
www.BormannTools.com