E A R T H X J U M P P A C K T able of Contents Overview ................... 1 Operating Instructions ............... 2 Specifications ..................2 FAQ’s………………………………………………………………………..3 Regulations…………………………………………………………………4 Terminology……..……...…..….…...……………...………………………4 I C O N K E Y Valuable information Caution...
P A C K Overview Thank you for purchasing the EarthX Jump Pack. Please follow all the use and safety instructions. Fully charge the unit prior to its first use. Press the power button to check the state of charge (power level).
E A R T H X J U M P P A C K Operating Instructions Failure to follow these instructions may result in damage to the device! JUMP STARTING 1. Select the appropriate adapter cable (12 volt or 24 volt) 2.
E T X S E R I E S L I T H I U M B A T T E R I E S Dimensions (complete with 11in (L) x 7in (W) x 3.5in carrying case) Environmental Rating (with case) IP 52 (dust and dripping water) Operating Temperature...
Do I have to disconnect the Jump Pack immediately after starting? The EarthX Jump Pack is LiFePO4 with the same charging voltage as the main aircraft battery (charges up to 14.5V). As such, you can leave the Jump Pack connected after a start, but it is not recommended to do this as a normal practice.