Download Print this page
Pro-Elec PEL00300 Instructions

Pro-Elec PEL00300 Instructions

18” high velocity fan

Advertisement

Quick Links

Please read these instructions carefully before use and retain for future
reference.
IMPORTANT SAFETY INFORMATION
When using electrical appliances basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understands the hazards involved.
Children shall not play with this appliance.
Cleaning and maintenance shall not be made by children without supervision.
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
Do not operate this fan with a damaged plug or cord, after a malfunction or after
being dropped or damaged in any way.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Do not insert anything through the grille when the fan is in use.
Make sure that the fan is on a stable surface when operating.
18" High Velocity Fan
Model: PEL00300 & PEL00311

Advertisement

loading

Summary of Contents for Pro-Elec PEL00300

  • Page 1 18” High Velocity Fan Model: PEL00300 & PEL00311 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
  • Page 2 OPERATION • Connect the power plug to a suitable outlet. • Adjust the tilt of the fan to the preferred angle by swivelling it on the base bracket. • Select the desired speed using the speed control: 0 = Device off 1 = Low speed 2 = Medium speed 3 = High speed...

This manual is also suitable for:

Pel00311