ASA Electronics Jensen JHD40BT Quick Reference Manual

POWER: Press to power the unit ON/OFF.
MUTE: Press to mute.
AUDIO MENU: Press to cycle
through audio options. Will exit
after 5 seconds of inactivity. Press
and hold for more than 2 seconds to
access system menu.
VOLUME:
Press to increase/
decrease volume, adjust audio menu
item value, and navigate system
menu.
SEEK / TUNE / TRK: Press to adjust
selected system menu item.
SEEK / TUNE / TRK:
Press to step
through stations. Press and hold to
seek to next strongest station.
BAND / SEARCH: Press to cycle
between bands (FM1, FM2, FM3,
AM1, AM2). Each band has 6 presets
accessible via the preset buttons.
SEEK / TUNE / TRK:
Press to step
through stations.
JHD40BT QRG.indd 1
*Some features may not be available depending on installed factory options.
JHD40BT
QUICK REFERENCE GUIDE
INFO / ENTER:
Press to adjust selected
system menu item.
AS / PS / RETURN: Press to exit system
menu.
MODE: Press to cycle through available
modes (AM/FM Tuner, Weatherband, iPod,
USB, AUX In, BT Audio)
NOTE: To access "BT Audio", Bluetooth
be enabled in device settings.
RESET:
Press to clear errors or if function
buttons do not operate.
PRESETS 1-6:
Press and hold to save the
current station to the associated preset,
the preset number will show on the display.
Press again to recall the stored station.
AS / PS / RETURN:
Press and hold to save
the strongest 18 FM and 12 AM stations.
Press once to scan through the stored
presets.
MODE:
Press to cycle through modes until
you reach AM/FM Tuner.
MODE:
Press to cycle through modes until
you reach "WB".
must
®
10/28/2015 3:47:40 PM