Summary of Contents for Aquacentrum AquaVolta NANO
- Page 1 Enhanced NANO-BUBBLES NANO Hydrogen-Water Booster 5th generation MANUAL By Karl H. Asenbaum Version 2021/08...
- Page 2 2 - What is AquaVolta®? • The brand name Aquavolta ® is composed of the Latin term for water ( Aqua ) and the name of the inventor of the battery, Alessandro Volta . It stands for electrically-activated water. • In Germany, it was originally referred to as electrolyte water, later as "active water".
- Page 3 • Hydrogen gas, H was not recognized by medical 3 - NANO: The 5th generation research as the "gas of life" until the 21st century. When of hydrogen boosters drunk dissolved in water, it can produce antioxidant, anti- inflammatory and anti-apoptotic effects. In recent years, a mitohormetic effect has also come into focus, which has similar benefits to athletic training.
- Page 4 4 - Always fresh hydrogen (almost) free water selection Drinking You can always use your booster on the go, thanks to its water long-lasting battery. Any type We have designed the AquaVolta® NANO Hydrogen RO water Booster so that you do not have to rely on a single type fit! of water.
- Page 5 5 - Unit description / scope of delivery Screw-in production container 240 ml made Pressure equalisation holes of Tritan in the screw cap Bottle thread for 30 mm bottles Do not block! Screw cap As bottles do not have pressure equalisation holes, this method is always second choice.
- Page 6 6 - Note 1. Remove the orange silicone plug before commissioning and keep it. With a new unit, there may still be residual water under the plug for membrane protection. Pour this away and rinse with clean water. 2. If you do not use the unit for more than a week, fill water into the electrolysis cell to a height of max.
- Page 7 7 - General instructions for use ➢ Do not place the unit outdoors ➢ Only operate the appliance if you have read and understood the operating instructions. ➢ Do not use the USB-C cable if it is damaged or the ➢...
- Page 8 8 - Preparation for operation and charging Place the unit on a dry flat surface. Insert the USB-C plug of the power supply and charging unit into the socket. Before first use, the battery must be fully charged. The LED starts flashing red. Before first use, fill the glass container with max.
- Page 9 9 - Produce hydrogen water for drinking Important: the device must be filled with drinking water before you press the start button. Press the start button for 3 seconds. A beep indicates the start. The light goes on and you can recognize the hydrogen production by the fine rising bubbles.
- Page 10 10 - Cleaning / Equipment hygiene / Technical data • The inside of the glass container and the grid-shaped • Wipe the exterior of the unit with a damp soft cloth. round minus electrode that produces the hydrogen must be cleaned with 1 teaspoon of citric acid dissolved in •...
- Page 11 Unscrew the production Manufacturer (general importer and service centre): development) container and cover and Aquacentrum, owner Yasin Akgün clean them separately Münchener Str. 4 a D-85748 Garching near Munich LED does not Battery charged? Load again www.aquacentrum.de...
Need help?
Do you have a question about the AquaVolta NANO and is the answer not in the manual?
Questions and answers