Advertisement
Battery
Replacement
Hint: We recommend the use of alkaline
batteries for longer battery life.
1.5V X 2
(LR44 or equivalent)
SHOWN ACTUAL SIZE
Battery
Compartment
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver.
• Remove the battery compartment
door. Dispose of the worn batteries
properly. Insert two, new, alkaline
"button cell" batteries (LR44, or
equivalent) in the battery compart-
ment as shown. Make sure the
flat side of each battery (printed
with the battery designation)
faces out.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
Battery
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion
can damage this toy. Dispose of
batteries safely.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not
to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the Battery Replacement
instructions are to be used.
• If removable rechargeable batteries
are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug, enclo-
sure and other parts. Do not use a
damaged battery charger until it
has been properly repaired.
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and
water solution. Do not immerse
this toy.
• This toy has no consumer service-
able parts. Do not take the
base apart.
3
Tips
Advertisement
