Advertisement
Table of Contents
Open up the front plate and
press the handle to lift
Remove the ink roller
insert new ink roller
Clip the new ink roller upright in to
Release the handle and
clip the front plate into the holder
Pull out pointer and turn
to the selected digit
Push back pointer to original
position before printing
Find your language on
meto.com/hls/support
Visit us on Youtube
STEP 1
the ink roller
STEP 2
STEP 3
the holder
STEP 4
STEP 5
STEP 6
Advertisement
Table of Contents
Summary of Contents for Meto Classic L
- Page 1 Release the handle and clip the front plate into the holder STEP 5 Pull out pointer and turn to the selected digit STEP 6 Push back pointer to original position before printing Find your language on meto.com/hls/support Visit us on Youtube...
- Page 2 Feed the labels through the top of the transport unit until labels appear at the bottom of the unit. STEP 6 Press the handle several times until the label tape becomes visible at the end of the transport plate. www.meto.com Visit us on Youtube...
Need help?
Do you have a question about the Classic L and is the answer not in the manual?
Questions and answers