Page 2
This paintball marker is not a toy. Misuse or mishandling can 4. Always leave the PT Xtreme uncocked and turn result in serious injury or death. The PT Xtreme is to be used the power feed plug to the “off” position.
• Instruction manual Warning: Some petroleum based oils can damage The 32 Degrees PT Xtreme is almost ready to use out of your gun’s o-rings. Use only oil manufactured the box. All that is needed is a C02 tank, paintballs, and a specifically for paintball markers.If you expect any degree...
Page 4
Co2 cartridge lock. You will now want to need. The most common o-ring in the PT Xtreme is the remove the cartridge lock first. This can be done by “tank”...
Another possible given above. Be sure that your marker is clean and lubricat- cause of velocity problems with the PT Xtreme is a weak striker ed and remember Co2 is affected by temperature therefor spring.
Page 6
Co2 is a volatile gas that is greatly affected by temperature. More on C02... Double feeding paintballs: If your PT Xtreme is double Understanding the Characteristics of C02 feeding, you’ve probably lost the ball detent. A new one will almost certainly fix the problem. If not, your Understanding the characteristics of C02 is a bit more paint is probably very small.
Page 7
C02 quickly. Your tank the same. A high pressure system can be filled with gets cold because the either nitrogen from a bulk tank, or compressed air liquid C02 inside is from a compressor or a scuba tank that was filled changing into gas to from a compressor.
Page 8
3. Use only oil designed for paintball guns in your PT Xtreme. The primary function of oil in regards to your paint gun is to reduce friction in the moving internal components.
Need help?
Do you have a question about the PT Xtreme and is the answer not in the manual?
Questions and answers