Deezmaker Bukito Quick Start Manual
Hide thumbs
Also See for Bukito:
- Steps for assembly (30 pages) ,
- Assembly manual (28 pages) ,
- Assembly (26 pages)
Advertisement
Bukito Flight Check: What to do before starting to print for the first
Plug
i n
P ower
a nd
U SB
. ...........................................................................................................................
1
_______________________________________________________________
Plug in Power and USB
•
Open Repetier Host (see "Software Downloads" at bukobot.com).
Go to Printer settings. Select:
Mac: "usbmodem_bukito1"
•
Windows: COM(Number)
•
Linux: USB(Number)
•
For Mac and Linux there are no drivers required.
time. Version 3.0 Beta, Feb. 19, 2014.
Table of contents
2/19/
1 4
p .
1
Advertisement
Table of Contents
Related Manuals for Deezmaker Bukito
Summary of Contents for Deezmaker Bukito
- Page 1 2/19/ 1 4 p . 1 Bukito Flight Check: What to do before starting to print for the first time. Version 3.0 Beta, Feb. 19, 2014.
- Page 2 2/19/ 1 4 p . 2 For Windows, install teensyduino driver and set options to the following values: In all cases if you have a dropdown menu item “reset on connect,” set it to DISABLED. Attach your USB cable to your computer.
- Page 3 2/19/ 1 4 p . 3 Check Your Endstops Locate the blue reset button near the USB connector and be ready to press it if an endstop does not function.
- Page 4 2/19/ 1 4 p . 4 To check the height, slip a piece of paper under the nozzle to use as a feeler gauge (post-it notes work particularly well for this if you put the sticky side up and stick your fingers to it).
- Page 5 2/19/ 1 4 p . 5 Set the extrude length to 10mm and press “extrude” when the temperature curve display in Repetier Host indicates that it has reached the target temperature.
Need help?
Do you have a question about the Bukito and is the answer not in the manual?
Questions and answers