Download Print this page

FLAIM Systems Trainer Quick Setup Manual

Virtual reality training system
Hide thumbs Also See for Trainer:

Advertisement

Quick Links

FLAIM
Trainer
Quick Setup Guide
June 2020
flaimsystems.com
info@flaimsystems.com
Copyright © 2020

Advertisement

loading

Summary of Contents for FLAIM Systems Trainer

  • Page 1 FLAIM Trainer ™ Quick Setup Guide June 2020 Copyright © 2020...
  • Page 2 The FLAIM Trainer can also be used to train the public in the dangers of fire and allow them to appreciate the work that you do. The FLAIM Systems Team...
  • Page 3 Part 1. Put battery holders on top of the tripods Screw tripod swivel mounts and base stations onto the tripods Insert batteries into the battery holders Connect power cables after you have placed tripod in right place Raise tripods to approximately 2m/7ft height Setup tripods 6m/13ft apart, diagonally Check: Tracker LED lights are on Part 2.
  • Page 4 Part 4. Lay down BA set with connected VR Headset in front of hose reel With hose reel behind you, point the VR Headset to straight ahead Insert battery into battery compartment Turn BA on and wait for up to 4 minutes Check: On/off button LED light on BA should be on Check: HDMI receiver has connected to the FLAIM BA computer Check: Bottom of the screen shows the FLAIM control window...
  • Page 5 Take mouse and turn it on Pickup iPad Double click iPad button and stop (swipe away) running programs Start Flaim Trainer program on iPad Run “Room Setup” on iPad - when done, turn off and store mouse Click “Restart FLAIM System” on iPad Part 7.
  • Page 6 Breakdown Checklist Unscrew swivel mounts, base stations and battery holders Pack everything into case, in right place Fold tripods and store Take battery out of BA backpack and store Store BA set and place heat suit on top of BA Take care the cables are secured Disconnect “puck”...
  • Page 7 Quick Errors FLAIM screen does not show on TV (it stays on MIracast screen) Push the “Show Instructor Screen” on the iPad If that fails. Connect BA direct to screen with HDMI cable or re-pair using ‘Connect Display’ in Advanced Settings on iPad. iPad does not show FLAIM Instructor screen Check hose reel is on.
  • Page 8 flaimsystems.com info@flaimsystems.com Copyright © 2020...