PAMS Technical Documentation
When working with PWB, always use the Solder Jig (MJS-67). Do not reuse the old lids.
2.
Mount PWB on D-cover
Guiding hole
Guiding pin
Use pins for guiding.
3.
Mount Earpiece and Metal frame
1 Mount the Earpiece in Lightguide.
2 Place Metal frame on Lightguide. Be careful about the four springs in each cor-
Issue 1 05/02
1
3
ãNokia Corporation
Assembly & Disassembly Instructions
Guiding hole
Guiding pin
2
NHM-8NX
Page 15