Carson UVSight Pro SL-44 Quick Start Manual

UVSight
UV LED Flashlight
Congratulations on selecting your new UVSight Pro! In order to achieve optimum performance,
please follow instructions for proper use and care.
PRODUCT SPECIFICATION:
Illumination: 9 UV LEDs
Batteries: 3 AAA (not included)
0.15 lbs
Weight:
Dimensions: 1.2" x 1.2" x 3.8"
Carabiner Clip
Accessory:
INSTALLING BATTERIES:
1. Twist off top of Flashlight (in a
counterclockwise motion).
USING FLASHLIGHT: 2 BRIGHTNESS LEVELS
1. For brightest setting, press rubber
end once.
2. For low light, press rubber end
again.
3. Pressing a third time will turn
Flashlight off.
Pro
T M
2. Pull out battery holder to insert 3 new
AAA batteries in correct polarity.
3. Return battery holder to flashlight and
replace top of flashlight (in a clockwise motion).
4. To charge Glow-in-the-Dark Rubber Grip,
place in direct light for 5-10 minutes.
SL-44
WARNING:
Use only alkaline batteries. Mixing old
and new, different brands or types
within brands may cause batteries to
leak, overheat or explode. Keep away
from fire or excessive heat. Inspect
batteries for corrosion or leakage.
Insert in direction indicated.
Rechargeable batteries not
recommended.
˜°˛˝˙ˆˇ˘ˇ˘ˇ
˜°˛˝˙ˆ˛ˇ˘ˇˇˇ˛˝˛ˆˇ ˛
ˇ ˇ˛˙˛ˆ ˛˛ ˇ˛ ˛ ˇ˛
˝˛˙˛ ˇ˛˝˙ˆ
˛°˙ ˙˙
˛ˆ ˆ˙ ˙˙
˛ˇˆ ˆ˙ ˙˙
˙˛  ˝˛°˙˙ ˛
 ˛
˘˛˙˙ˆ ˘˘˝
www.carson.com
Carson Optical 2070 5th Avenue,
Ronkonkoma, NY 11779
Tel: 631-963-5000