Electrical Connection; Language Selection - Blomberg WAF 1500 Operating Instructions Manual

Fastening the hose holder:
1. Pull the holder included in delivery
over the end of the hose.
2. Hand the drain hose with the holder
over the edge of the basin or tub and
secure it from sliding off – e.g. by fas-
tening it with a chain around the wa-
ter tap.
Permanent connection to a siphon trap:
A
A qualified plumber should attach the
hose to prevent the hose from slipping
off. There is a risk of flooding.

Electrical connection

Connect the appliance to a properly in-
stalled earthed outlet, which is protected
by a fuse of adequate capacity.
Important:
• The connection must conform to the
applicable regulations in your country
and those set by your electricity
board.
• The power cable plug must be accessi-
ble after installation.
• Voltage and rated fuse protection is
specified on the type plate located on
the back of the loading door.
G
• The stated voltage must match with
your mains voltage.
• Connection by extension cables or
trailing sockets is not permitted.
B
A damaged power cable must be re-
placed by a qualified electrician.
Unless the appliance has been re-
paired it must not be operated! Risk of
electric shock!

Language selection

The language in which the washing pro-
grammes and messages are displayed 13
can be changed after the machine is
switched on.
12
21
1. Press 12 button.
2. Turn the knob, until the setting func-
tion appears on the display.
3
There is no programme duration dis-
played for this function, so it is easy to
recognise in every language.
3. Press 12 button.
4. Turn the knob, until the desired lan-
guage is displayed.
5. Press >Start/Pause< button to accept
the language setting.
6. Press 21 button to go back to pro-
gramme selection.
8
13