Function Switch In Soundbar; Description Of Each Button - Lenovo ThinkSmart Bar Deployment And Operation Manual

2.1 Function Switch in Soundbar

The Position of each button on the Bar:
Mic Mute BT Vol - Vol + Power

Description of Each Button

Mic Mute: You can enabled mute function mode of embedded microphone and satellite
microphone if it is connected. Also check the application side to indicate muting when
using with Microsoft MTR and Zoom Room application. This mute function is related
with mute button on satellite microphone. This button is operating with alternative mode.
Bluetooth (BT): You can enable blue tooth external speaker when it is not connected
as USB cable into a PC/audio equipment. To enable BT mode, push this button and
then it will start pairing mode. After pushing this button, set your smartphone or
Personal computer (PC) into Bluetooth mode and look for the name ThinkSmart Bar in
the smartphone or PC Bluetooth area. Click and connect. Add the pin code (now set as
5678) into smartphone, PC, then complete pairing procedure with this ThinkSmart Bar.
While using USB mode, after removing USB cable, it is not automatically enabled BT
mode even though activated pairing system is near the sound bar. It is required to push
Page 8 of 13