Do It Yourself, When - Blomberg TKF 1350 Operating Instructions Manual

Condenser drier with heat pump
Hide thumbs Also See for TKF 1350:
Table of Contents

Advertisement

Do it yourself, when...

Problem
The drying operation is taking excep-
tionally long
The drying result is not satisfactory,
the laundry is too wet
Drier cannot be turned on or the pro-
gram will not start
Drier does not react to input
Textiles are shrunk, felted, damaged
Drum lighting does not work
Indicator "Empty tank" is on
Indicator "Empty tank" is on although
tank has been emptied
Indicator "End/Anti-creasing" is on
Indicator "Clean fluff filter" is on
Indicator "Clean condenser" is on
Indicator "Time delay" is on
Indicator "Child lock" is on
Clean the fluff filter
Clean filter unit
Drum overloaded?
Clean fluff filter and filter unit. Fin-
ish the drying with a suitable timed
program.
Program chosen? Pressed the "Start"
button?
Power cable plugged in? Fuse for the
power outlet intact?
Door properly closed?
Child lock turned on?
If fault persists: Unplug the power
cable, wait a few seconds, re-plug.
Dry only textiles labeled suitable for
tumble drying.
Dry only with a program suitable for
the particular textile type.
On/Off – switch on "Off"?
Bulb defect? Call customer services
Empty water tank
Foreign objects can block the branch
fittings
When tank has been removed, switch
the drier on for a short time.
When tank has been removed, switch
the drier on for a short time.
Anti-crease phase is running (2
hours), turn off the drier, remove the
laundry
Clean the fluff filter
Clean filter unit
Time delay adjusted (1-19 hours)
Child lock switched on
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tkf 1350 s

Table of Contents