Download Print this page

Oxbox JAYLOAM001 Installation Manual

Low ambient controller

Advertisement

Quick Links

LOW AMBIENT CONTROLLER INSTALLATION MANUAL
Before using your unit, please read this manual carefully and keep it for future reference.
Read the safety precautions carefully before installing the unit.
Stated below are important safety issues that must be obeyed.
Confirm there is no abnormal phenomena during test operation after complete, then leave the manual with the end user.
Meaning of marks:
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in minor to moderate injury.
CAUTION
Please have a professional install this unit.
Installation by other persons may lead to improper installation, electric shock or fire.
Strictly follow this manual.
Improper installation may lead to electric shock or fire.
Reinstallation must be performed by professionals.
Improper installation may lead to electric shock or fire.
Do not disassemble the heat pump unless you are a professional servicing or repairing the unit.
Disassembly by a non-professional may cause abnormal operation or heating, which may result in fire.
Make sure all power to unit is turned off.
Before installing, modifying, or servicing system, main electrical disconnect switch must be in the OFF position and install a lockout
tag.There may be more than 1 disconnect switch. Always use a suitable warning label.
Beware of potential cut hazards.
Sheet metal parts may have sharp edges or burrs. Use care and wear appropriate protective clothing and gloves when handling
parts.
Follow all safety codes.
Wear safety glasses, protective clothing, and work gloves. Use wet cloth for brazing operations and have fire extinguisher available. Read
these instructions thoroughly and follow all warnings or cautions included in literature and attached to the unit. Consult local building codes
and current editions of the National Electrical Code ( NEC ) NFPA70. In Canada, refer to current editions of the Canadian electrical
code CSA 22.1.
JAYLOAM001
Thank you very much for purchasing our product.
SAFETY PRECAUTION
WARNING
CAUTION
1
88-MACC008-1A-EN
16123000A17426 V.B

Advertisement

loading
Need help?

Need help?

Do you have a question about the JAYLOAM001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Oxbox JAYLOAM001

  • Page 1 88-MACC008-1A-EN LOW AMBIENT CONTROLLER INSTALLATION MANUAL JAYLOAM001 16123000A17426 V.B Thank you very much for purchasing our product. Before using your unit, please read this manual carefully and keep it for future reference. SAFETY PRECAUTION Read the safety precautions carefully before installing the unit.
  • Page 2 Introduction These instructions cover installation of ICM Part No.325-HN on all split system heat pumps. The device is designed to control outdoor fan motor speed under low outdoor temperature conditions. It is specifically designed to control condenser fan motor speed in reponse to the saturated condensing temperature during operation in cooling mode only.
  • Page 3 Mounting control assembly STEP 7- Put control assembly in electrical box and fasten it with two screws provided with the kit. STEP 8- See wiring diagram for wiring connections (Figure 5). Note:The high voltage power supply must agree with the equip ment nameplate.
  • Page 4 Mounting control assembly - Connect the Outdoor Fan Motor black wire with the grey wire STEP 9- Fasten the wires with the strap and screws provided. of the ICM325-HN Module with the terminal. Outdoor Fan Motor Figure 8 Figure 9 Outdoor Unit Control Box Low Ambient Control Box...