Table of Contents
Advertisement
Operation
Switching on/off
NOTICE
Set the AUTO ON switch (H) to NORMAL setting before
switching on.
•
Connect the power plug (P) to an appropriate power source.
•
To switch on, press the POWER button (A). The power indicator (R)
lights up red for 8 seconds then lights up green.
•
To switch off, press the POWER button (A) again. The power
indicator (R) goes off.
•
When not in use, disconnect the product from the power source.
Audio controls
SPEAKERS
selector (B)
BALANCE knob (C)
VOLUME knob (D)
BASS knob (J)
TREBLE knob (K)
Auto on mode
NOTICE
The feature allows to power the product on automatically
when a source signal is detected. Ensure to select the auto mode before
switching the product on.
•
To activate the auto on mode, switch the product off and set the
AUTO ON (H) switch to AUTO position.
•
Switch on the product. The power indicator (R) lights up red to
indicate the product is in standby mode.
•
When an input signal is detected, the power indicator (R) lights up
green.
•
To deactivate the auto on mode, switch off the product and set the
AUTO ON (H) switch to NORMAL setting.
NOTICE
In auto on mode, if source input stops for 10 minutes, the
product would enter standby mode automatically.
Use to select/deselect the zone A and zone B
speakers audio output.
Use to adjust the left/right balance of the audio
output.
Use to adjust the volume of the audio output.
Use to adjust the bass level of the audio output.
Use to adjust the treble level of the audio
output.
EN
11
Advertisement
Table of Contents
