Environmental Aspects - Atag HG511MX/T Instructions For Use Manual

faults
what should I do if...
If the appliance does not work properly, it does not always mean that it is defective. Try
to deal with the problem yourself first. If the following recommendations do not help,
call the repair service or installer.
fault cause
Burner does not burn or does No gas.
not burn correctly.
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
The ventilation slots at the
rear of the appliance are
blocked.
Appliance is not suitable for
the type of gas used.
The burner does not light. Sparking plug dirty.
Burner dirty or damp.
Burner cap not fitted on the
burner correctly.
Incorrect gas/air mixture.
Burner lights but goes out Burner protection not
again. working.
Gas tap not fully pushed in.
Ignition not working
(HG511MT).
GB 10
solution
Open gas tap.
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly. Bear in mind
the position of the lugs.
Unblock the ventilation slots.
Check the data plate and in
the case of discrepancies
warn the authorised installer.
Clean the sparking plug.
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly. Bear in mind
the position of the lugs.
Turn gas tap slightly.
Hold control knob pushed in
fully for longer.
Push gas tap in fully.

environmental aspects

disposal of packaging and appliance
The appliance's packaging is recyclable. The following can be
used:
• cardboard;
• polyethylene film (PE);
• CFC-free polystyrene (PS rigid foam).
Dispose of these materials in a responsible way and in
accordance with government regulations.
The authorities can provide you with information about how
to dispose of discarded domestic appliances in a responsible
way.
GB 11