Hamilton Beach Proctor Silex 78450 Operation Manual page 5

ASSEMBLY
Electrical Shock Hazard. Before cleaning or servicing the
w WARNING
Dehydrator, make sure it is unplugged from the power source. It is important to
read and fully understand all of the instructions and safeguards prior to use of the
Dehydrator.
1. Install Shelf Brackets (five on each side of cabinet) on inside of Dehydrator.
2. Insert a Shelf Bracket so that the stoppers are in the back of the Dehydrator
( FIGURE 1 ).
3. Starting at bottom, install the Shelf Bracket by sliding it into notches on sides
of Dehydrator ( FIGURE 2 ).
4. Assemble five rails on each side of the Dehydrator.
5. Slide a Rack onto each Shelf Bracket rail.
Shelf Bracket –
Back of Dehydrator
Stoppers
Go in the Back
Shelf Bracket –
Right Side
Left Side
Notches on Inside of
Dehydrator
FIGURE 1
FIGURE 2
Shelf Bracket –
Right Side
5