Important Safety Instructions WARNING. Use caution concerning the Power Cord (Can differ by country): Do not connect too many devices to the • same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
Page 4
• Do not attempt to modify this product in any way without written authorization. Unauthorized modification could void the user’s authority to operate this product. • Cleaning. When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching.
General Information 1. Specification Model C31Q14 M31Q14 Size 32" 32" Screen Type EPD Color EPD Monochrome Panel Model # EC312TT2 ED312TT2 Display Area 691.2 (H) × 388.8 (V) 691.2 (H) × 388.8 (V) mm Resolution 1280 x 720 2560 (H) × 1440 (V)
Page 7
3. Package Contents • EPD Display • Adapter • AC power cord • Li-ion Battery (Optional) • User Manual *The appearance of the components may differ from the images sho...
Page 8
4. Rare Side Battery 10400mAh (Optional) WIFI/BT Antenna Wall Mount (200 x 200mm)
Page 9
5. Side I/O SD Card (SD Card Excluded) Micro USB Reset Hole LED Indicator Power on/Off AC In...
Page 10
Connect to AC Step 1: Connect Adapter & AC cord to AC Outlet. Step 2: Once the display connected with AC power, the display will auto turn on, Blue LED is blinking. Step 3: The display is working.
Page 11
Battery (Optional) Charging Step 1: Unscrew Battery Cove Step 2: Pull Out Battery Pack Step 3: Connect Battery Pack with Adapter & Power cord then you can start charging. Step 4: Battery Charging, the Green LED is on. (DC power is using, the Red LED is on).
Page 12
BT Pairing Step 1: Prepare the follows: 1) Android Mobile Phone 2) nShow_1.0.apk Step 2: Install nShow_1.0.apk to Android Mobile Phone Step 3: Open APP “nShow” Step 4: Tap center of Screen Step 5: Device list pops up. Select a Device for Pairing Device Name “Realtek Tablet”...
WIFI Setting Step 1: Prepare 1) Android Mobile Phone 2) nShow_1.0.apk Step 2: Install nShow_1.0.apk to Android Mobile Phone (If nShow_1.0.apk is installed, you can skip step 1 & 2) Step 3: Open APP “nShow” Step 4: Drag Side of Screen to Right Step 5: Main Menu Pops up Step 6: Select “Settings”...
Display Management 1. Picture transferred from Mobile phone to 1xEPD Display. Step 1: Prepare 3) Android Mobile Phone 4) nShow_1.0.apk Step 2: Install nShow_1.0.apk to Android Mobile Phone (If nShow_1.0.apk is installed, you can skip Step 1 & 2) Step 3: Open APP “nShow” Step 4: Tap center of Screen Step 5: Device list pops up.
Page 16
Step 7: Main Menu Pops up and slid down to the bottom Step 8: Select Landscape 1x1 Step 9: Select Picture, Tap “Pick Picture”.
Page 17
Step 10: Tap Center of Screen, file started transferring.
Page 18
2. Picture transferred from Mobile phone to 4xEPD Displays. Step 1: Prepare Android Mobile Phone nShow_1.0.apk Step 2: Install nShow_1.0.apk to Android Mobile Phone (If nShow_1.0.apk is installed, you can skip Step 1 & 2) Step 3: Open APP “nShow” Step 4: Tap center of Screen Step 5: Device list pops up.
Page 19
Step 8: Select Landscape 2 x 2 Step 9: Select Picture, Tap “Pick Picture”. Step 10: Tap “Send to All Signage” and start transfer.