Checking Out My Little Therm; Using The Thermal Pack - Whitehall Thermalator LITTLE Therm Instructions For Operation And Care

Instructions for Operation and Care of Little Therm Compact Thermalator

CHECKING OUT my Little Therm

Before the FIRST use, check the following:
1- The Little Therm should be level.
2- The Little Therm should be plugged directly into a properly grounded GFCI receptacle. Do not use
extension cord. Undersized extension cords can overheat.
3- The Little Therm should be in good condition.
Your new Little Therm is now ready for use. If you have any questions about SETTING UP or CHECKING
OUT your unit, please call the phone number listed on the back page.

USING the Thermal Pack

1- For each use:
1
Open the lid.
3
Wrap the pack in a
Thermal Pack Cover
or 5 to 6 layers of
terry toweling.
8
WHITEHALL MANUFACTURING • P .O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
2
Using tongs,
carefully remove
the Thermal Pack.
Caution: the
Thermal Pack can
cause skin burns.
4
Put the wrapped
pack on the area to
be treated for a
pre-set treatment
time.