Download Print this page
Amerec A220FP Installation And Operating Instructions Manual

Amerec A220FP Installation And Operating Instructions Manual

Fragrance injector pump

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the A220FP and is the answer not in the manual?

Questions and answers

Summary of Contents for Amerec A220FP

  • Page 2: Installation Overview

    The Model A220FP Fragrance Injector Pump is to be used with the AK and 3K steamers when the K200i Freedom Control is not installed. The pump should be mounted in an easily accessible area, not more than 4' above the essence container and not more than 4' below the saddle valve.
  • Page 3 A220FP Fragrance Injector Pump page 2 Installation and Operating Instructions General Installation Determine locations suitable for mounting the Fragrance system's components: • The On/Off switch should be mounted where it is convenient to the user. It is used to start or stop the fragrance controller.
  • Page 4 A220FP Fragrance Injector Pump page 3 Installation and Operating Instructions Install the Pump with the Provided Bracket DIAGRAM 4 Select a location to mount the pump and essence con- Pump Back Adhesive tainer. The pump should be mounted on a vertical surface...
  • Page 5 A220FP Fragrance Injector Pump page 4 Installation and Operating Instructions Install the Pump Tubing (Diagram 8) DIAGRAM 8 • Route the suction tubing from the essence bottle to the Pump Front pump making sure there are no kinks in the tubing and...
  • Page 6 A220FP Fragrance Injector Pump page 5 Installation and Operating Instructions Install the Fragrance Controller (continued) DIAGRAM 14 DIAGRAM 12 while pressing the terminal block tabs with a small tip screw driver. Release the tabs to secure the wires. Single Position •...
  • Page 7 A220FP Fragrance Injector Pump page 6 Installation and Operating Instructions Basic Operation (continued) • Pressing the switch while the injector system is running will turn the system off again. • The essential oil will only be pumped into the steam outlet while steam is being sent to the room. This helps carry the essence into the room and reduces the risk of oil building up in the steam line, unused.
  • Page 8 A220FP Fragrance Injector Pump page 7 Installation and Operating Instructions Description Item Provided Part # Fragrance Controller 8855-140 Cable, Modular Plugs, 8 Conductor, 25' 5304-031 Cable, 3 Conductor, 25' 5331-12 Instructions, Rough In 4211-136 Rough In Bracket 4000-23 Rough In Insert...