Advertisement
Controller display
Shows time of day, day of the week, Zone being watered and watering
run time. Also alerts you to programming errors and short circuits.
Clock key
For preparing clock to accept the current time and day.
CHG Time key
For setting current time of day, as well as start and run times for each Zone.
Start Time key
For setting up to four start times per day.
CHG Day key
For setting current day and watering days for each Zone.
Zone key
For displaying the six Zone settings to allow for programming and
reviewing schedules.
Clear/Rain key
For stopping automatic watering in progress, preventing automatic
watering from starting, or clearing entry errors.
Pause key
For temporarily interrupting a watering cycle in progress.
Manual key
For watering all Zones or a selected Zone manually.
Day/Numbers keys
For setting clock time, watering days and watering run times.
Terminal screws
For connecting transformer, valve wires and optional pump relay to controller.
Battery connector
For installing 9-volt battery for built-in, fail-safe program.
Plug-in transformer
For converting 120-volt household current into safe, low-voltage power.
(250-volt source on 50 Hz units.)
5
Advertisement
