Summary of Contents for Dataplex OPTO-SPLITTER
- Page 2 DATAPLEX Opto-Splitter User Manual Dataplex--Opto-Splitter-v1.2 Effective 12 September 2020 © Copyright 2020, TMB All rights reserved TMB authorizes its customers to download and print this electronically published manual for professional use only. TMB prohibits reproduction, modification or distribution of this document for any other purposes, without express written consent.
- Page 3 FUSE REPLACEMENT—E RROR OOKMARK NOT DEFINED OPERATION —ERROR! BOOKMARK NOT DEFINED. RDM / DMX SERIAL LINK – OPTO-SPLITTER 1 8 XLR—12 RDM / DMX SERIAL LINK – OPTO-SPLITTER 1 8 PTB—13 RDM / DMX SERIAL LINK – OPTO-SPLITTER 1 8 IDC—14 FRONT PANEL LED INDICATORS—15...
- Page 4 LIMITED WARRANTY Dataplex Data Distribution Devices are warranted by TMB against defective materials or workmanship for a period of two (2) years from the date of original sale by TMB. TMB’s warranty shall be restricted to the repair or replacement of any part that proves to be defective and for which a claim is submitted to TMB before the expiration of the applicable warranty periods.
- Page 5 PRODUCT OVERVIEW Dataplex Opto-Splitters distribute a single DMX universe to up to eight isolated outputs. The RackMount units are available with a range of connector options including IDC (Insulation-Displacement Contact), PTB (Pluggable Terminal Block) and Neutrik 5-Pin XLR. Dataplex Opto-Splitters feature optional RDM functionality. Dataplex products are designed as an affordable, high-performance signal management solution and ensure the safety of connected equipment.
- Page 6 MODEL ILLUSTRATION DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 7 DIMENSIONS OPTO-SPLITTER 1 8 (RDM) XLR DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 8 DIMENSIONS OPTO-SPLITTER 1X8 (RDM) PTB DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 9 DIMENSIONS OPTO-SPLITTER 1 8 (RDM) IDC DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 10 Never disconnect power cord by pulling or tugging on the cord. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your distributor. DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 11 Disconnect the power cord before replacing a fuse and always replace with the appropriate fuse. Dataplex Opto-Splitters use a 1.0A 250V barrel fuse, 5x20mm (0.2x0.8 in.). To replace fuse: 1—With a screwdriver, open the fuse drawer to access the fuse.
- Page 12 2—Connect the female end of the DMX cable coming from the lighting console to the 5-pin male input connector of the Opto-Splitter 1x8 XLR. 3—Connect additional DMX cables to output connectors of the Opto-Splitter Mini 1x5 RDM and link them to fixtures, daisy-chaining as necessary.
- Page 13 DMX signal to another device, use the Thru port. 4—Connect additional cables to each of the eight optically isolated PTB output ports in order to send data to any DMX device, daisy-chaining between fixtures as necessary. DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 14 DMX signal to another device, use the Thru port. 4—Connect additional cables to each of the eight optically isolated IDC output ports in order to send data to any DMX device, daisy-chaining between fixtures as necessary. DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 15 FRONT PANEL LED INDICATORS POWER STATUS— INPUT STATUS— Indicates whether the DMX signal is received at the input. Input status indicators have two states: DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 16 REAR PANEL LED INDICATORS INPUT STATUS— Indicates whether the DMX signal is received at the input. Input status indicators have two states: DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 17 Shipping 20.5 x 3.5 x 7.38 in Dimensions [520.7 x 88.9 x 187.5 mm] (WxHxD) Unit Weight 3.4 lb [1.54 kg] 3.2 lb [1.45 kg] Shipping 3.8 lb [1.72 kg] 3.6 lb [1.63 kg] Weight DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 18 Note: If you are given an RMA #, please include the following information on a piece of paper inside the box: 1—Your name 2—Your address 3—Your phone number 4—The RMA # 5—A brief description of the symptoms DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020...
- Page 20 CONTACT INFORMATION LOS ANGELES HEADQUARTERS 527 Park Avenue | San Fernando, CA 91340, USA Tel: +1 818.899.8818 | Fax: +1 818.899.8813 sales@tmb.com TMB 24/7 TECH SUPPORT US/Canada: +1.818.794.1286 Toll Free: 1.877.862.3833 (1.877.TMB.DUDE) UK: +44 (0)20.8574.9739 Toll Free: 0800.652.5418 techsupport@tmb.com LOS ANGELES +1 818.899.8818 LONDON +44 (0)20.8574.9700 NEW YORK +1 201.896.8600 BEIJING +86 10.8492.1587...