Download Print this page

Power Supply - Blodgett KLS-20G Specifications

Gas tri-leg stationary kettle
Hide thumbs Also See for KLS-20G:

Advertisement

KLS-G TRI-LEG STATIONARY KETTLE
MODEL
A
B
KLS-20G
20[508]
31.25[794]
KLS-40G
26[660]
35.5[902]
KLS-60G
30[762]
40[1016]
SHORT FORM SPECIFICATIONS
Provide Blodgett model KLS-20G (20 gallon), KLS-40G (40 gallon) or KLS-60G (60 gallon) gas fired tri-leg stationary kettle. The unit shall have a double wall interior to form a steam jack-
et around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat cir-
culation. Construction shall be of all welded satin finish 304 stainless steel. Interior liner shall be 316 stainless steel on 20 and 40 gallon models. The unit shall have 6" stainless steel
adjustable legs, a 2" tangent draw off valve, hinged cover on 20 and 40 gallon models, and a spring assist cover on 60 gallon models. The recessed control panel is located on the front ise
of the unit in full view of the operator and is easy to use. The controls shall be integrally mounted and shall include a power switch, electronic ignition, direct immersion thermostat with a
range of 165-275F (74-135C), water site glass with range of 165-275°F (74-135°C), a cook indicator light, pressure gauge, safety gas shutoff valve, pressure relief valve, low water light and
low water shut off. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.
MAXIMUM INPUT:
KLS-20G
100,000 BTU
KLS-40G
100,000 BTU
KLS-60G
130,000 BTU
GAS SUPPLY:
One 1" male connection required
Minimum Inlet Pressure:
Natural
4.0" W.C. static to unit
Propane
10.0" W.C. static to unit
NOTE: The company reserves the right to make substitutions of components without prior notice.
Printed in U.S.A.
C
D
40[1016]
32[813]
3[76]
44[1118]
38.5[978]
2[51]
49.5[1257]
42[1016]
2.5[63]

POWER SUPPLY:

115VAC, 1 phase, 60 Hz., 2-wire w/ground
208-240VAC, 1 phase, 60 Hz
SHIPPING INFORMATION:
Approx. Weight:
KLS-20G
490 lbs. (222 kg)
KLS-40G
650 lbs. (294 kg)
KLS-60G
800 lbs. (362 kg)
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
NOTE: FOR COMMERCIAL USE ONLY
E
F
G
19[483]
64[1626]
19[483]
72[1829]
21.5[546]
85[2159]
BLODGETT
APPROVAL/STAMP
H
J
24[610]
30.5[775]
6[152]
29[737]
35[889]
6[152]
35[889]
39[991]
8[203]
6' (1.8m) electric cord set furnished
Supply must be wired to unit
P/N S00006 Rev D (12/06)
K
K
18.25[464]
22[559]
24.62[625]

Advertisement

loading

This manual is also suitable for:

Kls-40gKls-60g