Safety 1st IH200 User Manual

Smooth Clip Nail Clippers
Smooth Clip Nail Clippers
User's Guide IH200
Thank you for purchasing this Advanced Solutions™ product. We're proud to be your choice to help you
keep your child healthy and safe. Please read these instructions completely before using this product.
To Use
1.
Lift arm from hand grip and rotate 180°.
2.
Position nail between cutting edges and
squeeze handle to cut nail.
3.
Gently squeeze sides of clear guard to
disengage it from hand grip of clippers
(Figure A) and slide back to empty out
nail clippings. Emery board should rise
slightly out of storage compartment.
©2012 Cosco Management, Inc. All Rights Reserved. Todos derechos reservados.
www.djgusa.com (800) 544-1108 www.safety1st.com
Made in CHINA. Hecho en CHINA. Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus, IN 47201-7494
Dorel Distribution Canada, 873 Hodge, St. Laurent, QC H4N 2B1
08/15/12 4358-6053
4.
If emery board isn't easily accessible, press
inside clippers to assist with removal (see
*
Figure A ).
5.
Remove emery board from compartment
(Figure B) and use it to smooth any rough
fingernail edges after clipping.
6.
Return emery board to compartment and
press clear guard back onto clippers until it
clicks into place (Figure C).
CAUTION:
NOT allow children to play with it. When not in use,
keep out of reach of children. Be careful not to trim too
close to baby's sensitive skin.
B
A
*
C
This product is not a toy. DO
To Clean
Wipe with a damp cloth and dry after each
use. Sterilize metal portion by wiping with
rubbing alcohol.
Note
It is easiest to trim nails while baby is
sleeping.