Tepex MDS Series User Manual

X
tel. 00385 49 222 900
fax. 00385 49 426 450
e-mail: tepex@tepex.hr
web: www.tepex.hr
Kućište MDS-.
Housing MDS-.
U P O Z O R E N J E !
Upute za uporabu sadrže osnovne informacije o proizvodu.
Montaža, instaliranje, uporaba i održavanje trebaju biti
izvedeni prema ovoj Uputi kako bi bio osiguran siguran rad
unutar nazivnih karakteristika. Ovu Uputu nadopunjuju
nacionalni Pravilnici i norme. Odgovorna osoba korisnika je
dužna osigurati njihovo provođenje. Neprovođenje može
umanjiti protueksplozijsku zaštitu uređaja i dovesti u
opasnost ljude, imovinu i okoliš. Svako neispravno i
nedozvoljeno postupanje kao i nepoštivanje odredbi ove
Upute isključuje svaku odgovornost proizvođača.
Prije ugradnje/puštanja u pogon:
- Pažljivo pročitati cijelu Uputu za uporabu,
- Izvršiti odgovarajuću obuku odgovornog osoblja,
- Provjeriti da je sadržaj ove Upute u potpunosti razumljiv
odgovornim osobama,
- Uvjeriti se da su primijenjeni svi zahtjevi nacionalnih Pravilnika i
posebne sigurnosne mjere ukoliko postoje.
U slučaju nejasnoća:
- Kontaktirati proizvođača.
Tijekom pogona:
- Osigurati da ove Upute za uporabu i druge radne upute korisnika
budu vidljivo istaknute i dostupne odgovornom osoblju cijelo
vrijeme,
Medarska 69, Zagreb, Croatia
Made in Croatia
Doc. No.: TEPEx.RS.118
Ver: 1
Date: 01. 2020.
Upute za uporabu
User manual
W A R N I N G !
The user manual contains basic information about the
product. Mounting, installation, usage and maintenance
should be carried out under this user manual to provide and
ensure safe operation within the nominal characteristics.
This user manual complement national Regulation and
Standards. The responsible person shall ensure their
implementation. Failure off implement this user manual can
reduce explosion protection and endanger people, property
and the environment. Any improper and illegal actions as
well as non-compliance with the provisions of this user
manual excludes all responsibility by manufacturer side.
Before installation/commissioning:
- Carefully read all instructions,
- Execute proper training of responsible personnel,
- Check that the contents of these instructions is fully
understandable by the responsible personnel,
- Make sure that all the requirements and national Regulations
as well as all special security measures are applied.
In lack of understanding:
- Contact the manufacturer.
During operation:
- Ensure that this user manual and other work instructions are
available to the responsible staff at all times,
- Check the implementation of these instructions and all other
safety user's instructions
1