Frequency transducer for limit value monitoring or recognition of the direction of speed (26 pages)
Summary of Contents for ESTERS ELEKTRONIK FMP 1836
Page 1
Pressure Flow Rate Temperature IM 109 E NSTRUCTION ANUAL Device: FMP 1836 - with LCD display measurement computer for limit value monitoring of frequency input Content: Instruction manual Rev.-No.: IM 109 E V0.1-2017-06-26; FW 4.12 Instruction Manual IM 109 E Page 1 Phone: +49 (0) 6021 –...
If you have any questions, please contact your supplier or the respective distribution centre. Instruction Manual IM 109 E Page 4 Phone: +49 (0) 6021 – 45 807 -0 Esters Elektronik GmbH eMail: info@esters.de Fax: +49 (0) 6021 – 45 807 -0 Hafenrandstr.
General information The FMP 1836 is a 2-channel device “A” and “B” for monitoring the limit value of frequency inputs. Two signal converters SC 500 are connected to port 1 and 2. Each channel monitors 3 limit values. The device has implemented 7 relays.
Installation may only be performed by specialist, trained personnel. Servicing and maintenance activities may only be performed by Esters Elektronik GmbH technicians or by persons trained by Esters Elektronik GmbH. Contact:...
Temperature Technical specifications The FMP 1836-8001 is available as 2-channel unit. The device series has been constructed according to the modular principle. The principle allows configuration of inputs and outputs as well as of interfaces and software options according to individual usage and operating system requirements.
Protection class IP 65 Dimensions: 385.5 (W) x 487 (H) x 210 (D) mm IELD HOUSING WITH ZONE OPTION M105) Wall mounting Protection class IP 65 OTAL WEIGHT FMP 1836 480 g M104 3650 g INCL IELDHOUSING M105 5650 g INCL...
EYS ON FRONT Scroll can be used for operation. Instruction Manual IM 109 E Page 14 Phone: +49 (0) 6021 – 45 807 -0 Esters Elektronik GmbH eMail: info@esters.de Fax: +49 (0) 6021 – 45 807 -0 Hafenrandstr. 14 · D-63741 Aschaffenburg...
10 Configuration using the software E3DM The software E3DM is used to set the required parameters (6051-6052) and the limitators for the limit value monitoring. Connect the FMP 1836 using the USB cable with the computer and start the program E3DM.
Need help?
Do you have a question about the FMP 1836 and is the answer not in the manual?
Questions and answers