Summary of Contents for Bavis SIP II
- Page 1 The Technology Leader in Drive-Thru! SIP II VoIP Audio Interface INSTALLATION & SERVICE MANUAL E.F. Bavis & Associates, Inc. 201 Grandin Road (513) 677-0500 Maineville, Ohio 45039 P/N 00900274 bavis.com...
-
Page 2: Table Of Contents
ADDITIONAL SAFETY INSTRUCTIONS Warning – To reduce the risk of fire or electronic shock, do not expose this apparatus to rain or moisture. Revised 11/05/2013 All Rights Reserved Copyright 2013 E.F. Bavis & Associates, Inc. -
Page 3: Sip Ii System Overview
• The SIP II system can be configured with either a static or DHCP assigned IP address. tuned for use in the drive-thru environment The DHCP function can be set up with an adjustable timeout or no timeout (Factory default (Consult with the factory for optional AEC is configured for DHCP assigned IP address with 60 second timeout). -
Page 4: Current Settings
E.F. BAVIS SIP II VOIP AUDIO CURRENT SETTINGS CURRENT SETTINGS Current Settings Description Serial Number Shows the device serial number Mac Address Shows the MAC address of the device BAVIS SIP-II Controller Firmware Version Shows the current firmware version IP Addressing... -
Page 5: Audio Configuration
E.F. BAVIS SIP II VOIP AUDIO AUDIO CONFIGURATION AUDIO CONFIGURATION Volume Settings Description Speaker Volume Adjust outgoing audio level ‘0-9’ Microphone Gain Adjust incoming audio level ‘0-9’ BAVIS SIP-II Controller Echo Cancellation Select echo cancellation configuration ‘0’ for outside lanes... -
Page 6: Network Configuration
E.F. BAVIS SIP II VOIP AUDIO NETWORK CONFIGURATION NETWORK CONFIGURATION The computer and SIP II system will need to on the same network (if experiencing issues please consult the factory) BAVIS SIP-II Controller Stored Network Settings Description IP Addressing Select static or DHCP addressing (factory default DHCP) -
Page 7: Sip Configuration
E.F. BAVIS SIP II VOIP AUDIO SIP CONFIGURATION SIP CONFIGURATION SIP Settings Description Call Manager 1 Enter call manager 1 IP address Call Manager 2 Enter call manager 2 IP address BAVIS SIP-II Controller Call Manager 3 Enter call manager 3 IP address... -
Page 8: Username
Please consult with the factory for firmware upgrades To upgrade the firmware click ‘Browse’ and navigate to the file location then press ‘Submit’ Note: The file name must be in the following format, xxxxx-uimage-bavis (the default is not set to this format)
Need help?
Do you have a question about the SIP II and is the answer not in the manual?
Questions and answers