Media Arrangements - Honeywell Flare Front Series Installation Manual

MEDIA ARRANGEMENTS

Flare Fireplaces can be equipped with different media types. Follow the instructions below for information on how to
add and arrange media in your Fireplace:
•
Do not place any type of media on the pilot or in front of the pilot. Keep 1" distance from the pilot to allow
correct operation of the pilot.
•
Media can be put over the Flare burner. Avoid placing media over the main burner ports as it may disrupt
flame in case of a clogged port. Avoid placing driftwood arching over burner, instead place in front or behind.
•
If using media that was not supplied by Flare Fireplace, make sure that the media is certified/suitable to be
used in direct vent gas fireplaces.
•
Keep the pilot front cover view open to be able to view the pilot spark and flame from outside.
•
Fireglass:
a.
b. When the fireplace viewing window is open, and media is placed, make sure Fire Glass does not fall
c.
d. Flare Fire Glass can be put safely into the firebox. Avoid overloading the burner with Fire Glass,
•
Maintain minimum distance of ¼" from media to the fireplace glass panels.
•
Use the manual for instructions on how to remove, replace, & arrange the fireplace glass media
PROPER DRIFTWOOD PLACEMENT
CHOKING HAZARD! Ensure that the fireplace area is clear of fire glass particles as these could be ingested by small
11 | P a g e
¼" or ½" Fire Glass may be used.
on the ceramic glass lower frame as that may cause breakage when putting back the ceramic glass.
Make sure pilot is clear of any Fire Glass particles.
specifically over the main burner ports.
Ceramic Pebbles
children. Vacuum area after installation.
IMPROPER DRIFTWOOD PLACEMENT
Fireglass