Download Print this page

Daewoo electricals HEA1488 Manual

King size heated blanket

Table of Contents

Need help?

Do you have a question about the HEA1488 and is the answer not in the manual?

Page 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference: Read and familiarise yourself with all operating instructions before using this  Electric Blanket. Before plugging your unit into the mains, visually check that the unit is intact ...
Page 3 When in use the control unit must not be placed near open windows or inside  the bed covers. Be sure the blanket is only connected to an electrical supply as specified in  the instructions. Switch off the power and remove the plug from the socket outlet when not in ...
Page 4 Fitting the electric blanket 1. Place the blanket on the mattress, leaving room for the pillow and with the mains lead at the pillow end. 2. Pass the middle tie tape under the mattress and through the middle loop on the opposite side.(1) 3.
Page 5 There is a neon indicator which illuminates when the blanket is switched on NOTE: On initial use it is recommended that the blanket be set on 3 for a period of two hours to dry any moisture in the blanket and mattress. For continuous use setting 1 is recommended.
Page 6 DO NOT WRING. Please read these operating instructions thoroughly and keep them in a safe place for future reference. Remove all packing materials and discard responsibly. Technical Data Voltage 220-240V ~ 50Hz Rated power : 120W Model HEA1488 Class II...