Table of Contents
Advertisement
Available languages
Available languages
FILTRES SOUFFLES TOP
TOP BLOW MOULDED FILTERS
1.
SYMBOLS MEANINGS USED HEREIN
DANGER
Risk of electrocution.
DANGER
Risk of personal injury.
ATTENTION
Risk of system deterioration.
2.
GENERAL SAFETY INSTRUCTIONS
The instructions listed below are purely indicative and in no way limited. The pump must always
be handled with the most care.
▪ This product is destined for private usage for the maintenance of swimming pool water.
▪ Do not modify the filter; the guarantee will automatically be invalidated in the event of any modification thereof.
▪ For any repairs, only use spare parts supplied by the manufacturer; the latter will not be held liable for any damage
caused by the use of non-original spare parts or parts which have been modified without prior agreement.
▪ The safety and correct operation of the filter are guaranteed only if all the installation and commissioning
instructions have been followed correctly.
▪ In the event of a malfunction or failure, please contact your nearest manufacturer's representative or the
manufacturer's Technical Support Service
3.
INSTALLATION AND ASSEMBLY
The filter is pre-assembled. It is supplied fixed to its base (9) with the central pipe (6), the strainers (7), the clamps (3) and
the centring plug (already installed – see illustration on the following page). It is supplied with a small bag containing the
pressure gauge (2), the valve/tank joint (10), the valve and all the couplings (please refer to the paragraph relating to
connections).
3.1 POSITIONING AND ASSEMBLY
▪ The filter must be positioned:
- on flat ground, which is very stable and firm,
- such that the 6-way valve is accessible for regular maintenance,
- either below, or at a maximum of 2m above the level of the water in the pool,
- near a water drainage outlet.
15 Rue des Marais 44310 ST Philbert de Gd Lieu – Tel. 02 40 59 95 35 – www.acis-france.com
.
6
Advertisement
Table of Contents
