Subscribe to Our Youtube Channel
Summary of Contents for Amcrest HTR7213-B
- Page 1 HTR7213-B Thermal Kiosk Solution Quick Start Guide For access to a full user manual, please visit: Version 1.0.0 http://amcrest.com/support June 19 , 2020...
-
Page 2: Table Of Contents
Contents Features ..............................4 What’s Included?............................ 4 Application .............................. 4 Dimension and Component ........................5 Connection and Installation........................5 Installation ............................10 System Operations..........................12 Initialization ............................12 Adding New Users ..........................13 Access Management..........................14 Web Operations ........................... 15 Initialization ............................ - Page 3 This document provides a quick setup and overview of your Amcrest thermal kiosk solution installation and setup. For access to a full user manual or further information regarding your device please visit: http://amcrest.com/support...
-
Page 4: Features
Features ● A 7-inch LCD display with a resolution of 1024 x 600. ● Supports facial recognition, IC card unlock, and password unlock, as well as provide unlock schedules. ● 2MP, wide-angle WDR lens with auto/manual illuminator. ● With its current face recognition algorithm, the device can recognize more than 360 positions of the human face. -
Page 5: Dimension And Component
Dimension and Component Name Name Temperature monitoring unit Dual cameras Display Connection and Installation Cable Connections... - Page 6 Name USB port Power port 100M network port 1000M network port 5, 6 Ports for connecting the temperature monitoring unit Note: If an external security module is enabled the exit button, lock control, and firefighting linkage feature will be invalid. Installation Notes ●...
- Page 7 The device is sensitive to light waves with a wavelength of 10um to 15um. Avoid using it in the sun, fluorescent light sources, air conditioning outlets, heating, cold air outlets, and glass surfaces. Kiosk Stand Installation Step 1: Remove the rear cover and base cover. Step 2: Remove the vertical bracket from inside the stand.
- Page 8 Step 3: Run the cable of the temperature monitoring module through the module bracket joint and secure the temperature monitoring module to the module bracket joint using the provided mounting screws from the screw package. Step 4: Run the cable of the temperature monitoring module through the top of the stand and secure the module bracket joint to the top of the stand using the provided mounting screws from the screw package.
- Page 9 Step 6: Connect the temperature monitoring module to the temperature monitoring port on the back of the access control terminal. Run the cabling of the access control terminal through the stand and feed it into the base of the stand. Step 7: Connect the power adapter and applicable cabling inside the base of the stand and run the power cable through the base of the stand.
-
Page 10: Installation
Kiosk Wall Mount Installation The access control terminal can be installed on a wall or similar surface as well without using the kiosk stand. For more information on how to mount the access terminal, please refer to the information below. Recommended Places Recommended Places Not to Use Installation... - Page 11 Installation Procedures Step 1: Place the temperature monitoring device to the bracket and secure it using the 3 smaller installation screws. Step 2: Place the mounting bracket onto the mounting surface. Use a marker or similar tool to mark the installation holes on the bracket to the installation surface. Step 3: Use a drill to drill the installation holes on the installation surface and place the included wall anchors into the holes.
-
Page 12: System Operations
System Operations Initialization An administrator password and an email should initially set in the device. A device initialization screen will be displayed upon powering on the device. If an administrator password and email are not initialized, the system cannot be used. -
Page 13: Adding New Users
● The admin administrator username and password set in the interface can be used to access a web management platform using a web browser on a computer. ● The administrator password can be reset through the email address you entered in the interface. ●... -
Page 14: Access Management
Parameter Description Make sure that your face is centered on the picture capturing frame and the Face access controller will take a picture of the new user’s face automatically. You can register five cards at most for each user. On the card registration interface, enter your card number or swipe your card, and then the card information will be read by the access controller. -
Page 15: Web Operations
The device can configure up to 128 periods (weeks) with number ranges from 0-127. The user can set up to four periods for each day of the week. Users can only unlock the door in the periods that were set by the user. Holiday Groups The user can group holidays in the system. - Page 16 Step 1: Open the IE web browser and enter the IP address for your system. Please note, the device must be on the same network segment as your computer to access the web UI. The default IP address for the system is 192.168.1.108. Press Enter to access the interface. Note: To avoid issues, use a browser version newer than IE 8.
-
Page 17: Appendix 1 Notes Of Temperature Monitoring
Step 4: Enable the Auto Check checkbox to allow the system to inform the user of the latest firmware upgrades. Step 5: Click Next. Step 6: Click Complete to complete initialization to display the web login interface. Step 7. Enter the login credentials and click Login to access the homepage. Appendix 1 Notes of Temperature Monitoring ●... -
Page 18: Appendix 2 Notes Of Face Recording/Comparison
● Do not drop or splash liquid on the device. Please keep all objects filled with liquid away from the device to prevent damage to the unit. ● Ensure the device is installed in a well-ventilated area. Do not block any vents on the device. ●... -
Page 19: Appendix 3 Cybersecurity Recommendations
Note: Do not shake your head or body while registering a face otherwise it may fail. Avoid multiple faces in the captured frame as it may interfere with the facial recognition image. Face Position If your face is not in the appropriate position the face recognition effect may be influenced. Note: When importing face images through the management platform, make sure the image resolution is within the range of 150 x 300-600 x 1200 image pixels;... - Page 20 Update Firmware and Client Software in Time According to the standard procedure in Tech-industry, we recommend keeping your equipment (such ⚫ as NVR, DVR, IP camera, etc.) firmware up to date to ensure the system is equipped with the latest security patches and fixes.
-
Page 21: Fcc Statement
If your audio and video data contents are very important or sensitive, we recommend that you use encrypted transmission function, to reduce the risk of audio and video data being stolen during transmission. Reminder: encrypted transmission will cause some loss in transmission efficiency. 12. -
Page 22: Ic Warning Statement
To view setup videos for many of the steps outlined in this guide, go to http://amcrest.com/videos For more supplemental information, or to view articles related to your device visit http://amcrest.com/support For contact information please visit us at https://amcrest.com/contacts or reach out to us directly at 1-888-212-7538. © Copyright Amcrest 2020...
Need help?
Do you have a question about the HTR7213-B and is the answer not in the manual?
Questions and answers