Do you have a question about the DISTILLER PRO and is the answer not in the manual?
Questions and answers
Summary of Contents for Girovap DISTILLER PRO
Page 1
Register your GIROVAP to activate its warranty Get free access to techniques and recipes! GIROVAP - USER’S GUIDE...
Page 2
Conventional laboratory rotary evaporators are not intended for use in the kitchen or for cocktail making and thus don’t meet their requirements. GIROVAP puts an end to all the usual inconveniences: the lack of power in the vacuum due to constant leaks, high price, difficult and fragile maintenance which have been a real nightmare for many professionals.
Page 3
Its parts have been designed with a ground connection. to withstand all the demands of professionals Do not tamper with Girovap parts or components. and can be immediately replaced or exchanged It is essential to follow the instructions in this with many accessories and complements.
V - Pump switch. Manual position (I) Timer mode (II) W - LCD display and keypad functions REAR CHASSIS X - External probe connections Y - Electrical connection, main switch and safety fuse Z - Power cable Z1 - Teflon sheet GIROVAP - USER’S GUIDE...
Page 6
Know which are the three parts of GIROVAP that make it totally different from laboratory Rotovapors Membrane vacuum pump bar at room temperature. (Relative Pressure) Girovap is equipped with a double-bodied As it is a diaphragm pump, it does not require diaphragm vacuum pump that achieves a continuous maintenance.
Page 7
Girovap is the 15 cm mouth, which makes or the centering axis for solid products. But it very easy to remove the product from its what perhaps makes it easier to work with interior, as well as to clean it.
CLOCK button, the time value decreases. With the engine running, the speed of rotation decreases. Orange button This button has 3 positions Pressed in I, the pump acts manually. Pressed in position II, the pump operates in programming mode. In the middle position the pump is stopped. GIROVAP - USER’S GUIDE...
Page 9
99°C / 210.2°F. bottom. If Girovap is in operation you will not be able to The beaker will be held by the magnetic force change the bath temperature. of the magnets. Under no circumstances should this be done with the motor running.
Page 10
Some products are more sensitive to high temperatures. We must seek a good balance between these two options Bath temperature and internal temperature of the Girovap cup. Once we see that the temperature of the water the amount of product inside by counting the is the same as the selected temperature, we number of times the blade is in the glass.
Page 11
If the vacuum is correct, gradually increase the is completely leveled off. We can even leave speed of the Girovap to the speed of GIRO 7. the tap slightly open maintaining a medium There are certain products that, when...
Page 12
Connect a piece of hose to the vacuum during its reduction or distillation without the regulation valve (K). Submerge the other end GIROVAP - USER’S GUIDE...
Page 13
Thermal bath water level security system Girovap has a probe that detects a possible the water in the bain-marie so as not to fault or operating error. If by an oversight we concentrate the level of lime in the water.
Page 14
(meat or consommé depending on the product. It also tells us the broths, creams, sauces with a lactic base, approximate amount of distillate or extraction herbal hydrolats) and if we re-distil or extract we will get. GIROVAP - USER’S GUIDE...
Page 15
75°C / 167°F, we will obtain a point (boiling) of the water is generated at a distillation temperature of the liquor of 37°C / lower temperature. GIROVAP - USER’S GUIDE...
Page 17
This increase in alcohol content will depend on the point at In order to create and personalize new which we have stopped the re-distillation distillates, we must incorporate olfactory GIROVAP - USER’S GUIDE...
Page 18
Ethanol (ethyl alcohol) boiling point 78.37°C / alcohols at atmospheric pressure 1 bar 172°F (1 atm) and can be used as a guide to apply Ethanol weight 0.78 g Inflammation 13°C / the vacuum so that we can perform this 55,4°F GIROVAP - USER’S GUIDE...
Page 19
Extraction of alcohols (wines, liquors and perfumes) This application of the Girovap serves to (1 atm) and can be used as a guide to apply extract the alcohols from the drinks without the vacuum so that we can carry out this...
Page 20
In this type of reduction, certain interesting increasing the temperature of the bath again volatiles are usually lost during the first minutes by about 10°C / 50°F more. At the end of the of distillation. process, add the essence to the reduction. GIROVAP - USER’S GUIDE...
Page 21
This selection will be saved until the next the language and type of scale °C / °F modification. Timekeeping Girovap is designed to work independently, the supervision of a technician. By pressing although we recommend always working under the key we will enter the programming GIROVAP - USER’S GUIDE...
Page 22
CHRONO screen. The reflected time acts as a chronometer. Speed of rotation and reversal of direction of rotation When Girovap is in operation, we can speed, we recommend always starting from modify the GIRO speed at any time by low speed or from "0"...
Page 23
60 seconds alternating gyro mode). Minimum cold bath temperature control Girovap has a sensor that warns in case as they are not captured in the vessel and the cold bath is above 10°C / 50°F. This are absorbed by the vacuum pump. Girovap...
Page 24
To use this function, make sure that the glass containers. ROTATION factor is set to 0. With Girovap we can use the thermal bath Always in position STOP Select the as if it were a “Sous Vide” bath even though...
The cleaning steel. From time to time, decalcify the hot bath of Girovap is extremely simple and fast after (after about 100 hours of work) by adding 1 liter use, unlike laboratory equipment. Place all its of water and 100 ml of vinegar, heat to 60°C /...
- The coil has filled with vapor and the pump is not strong enough to remove the distillate from the coil. Remove the coil from the cold bath and place it upside down to help empty it manually, once empty return to normal position. GIROVAP - USER’S GUIDE...
Page 27
- The mass or product inside the cup is preventing the rotation. Unblock. - There is product under the magnetic rotor that is preventing traction. Remove. - Disconnect Girovap and reconnect with the main switch to make a restart. - The gyro system, blade or accessory is not properly mounted. Reassemble.
Whether within or outside the warranty period, any transportation costs necessary for the repair service, whether delivery and/or return of the appliance, shall be borne by the consumer. For any claim you can contact your distributor or via email orders@100x100chef.com. Register your GIROVAP to activate its warranty Free access to techniques and recipes!
Page 30
Meet the following standards: | Soddisfa le seguenti normative: EN50081-1 | EN50082-1 | EN61010-1 | EN61326 | EN61010-2-020 | EN61010-2-041 EN1672-2 Angel Salvador Esplugas General Manager Enero 2020| Janvier 2020 | January 2020 | Gennaio 2020 GIROVAP - USER’S GUIDE...
Page 32
If we add alcohol (Vodka) instead of water we will get some flavored tinctures, these products will keep longer but will also be more volatile. Better if we let it marinate for a while. Recommended proportion 500 g product / 100 gr alcohol (except coffee). ALCOHOL REDUCTIONS RED WINE CONCENTRATIONS GIROVAP - USER’S GUIDE...
Page 33
LOW TEMPERATURE COOKING VACUUM TIME LAVENDER TEA ORANGE /CINNAMON BLACK TRUFFLE RE-DISTILLATIONS GIROVAP - USER’S GUIDE...
Page 34
Decanter, clamp and foot (500 ml) Ref. 30/0052 Alcoholmeter with test tube 100 ml Ref. 80/0025 External Connection for Vacuum Pro & Girovap Ref. 80/0091 CLICK- IT valves. Make the vacuum in any container with thread Ref. 30/0076 10 units 0,5 ml graduated glass drippers and 120 ml bottle Ref.
Need help?
Do you have a question about the DISTILLER PRO and is the answer not in the manual?
Questions and answers