Download Print this page

Zest4Leisure Hollywood Swing with Canopy Assembly Instructions Manual

(w x d x h): 2.40m x 1.90m x 2.14m

Advertisement

Quick Links

V1-10.16
Assembly Instructions
(W x D x H): 2.40m x 1.90m x 2.14m
Product Name: Hollywood Swing with Canopy
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 – sales@zest4leisure.co.uk

Advertisement

loading

Summary of Contents for Zest4Leisure Hollywood Swing with Canopy

  • Page 1 V1-10.16 Assembly Instructions (W x D x H): 2.40m x 1.90m x 2.14m Product Name: Hollywood Swing with Canopy Pressure Treated products should not be treated with any other products for the first month. PLEASE KEEP THIS INSTRUCTION Zest4Leisure 01352 752555 option 1 – sales@zest4leisure.co.uk...
  • Page 2 60mm Screws 45mm Bolts, washers & nuts 100mm Bolts, washers & nuts 115mm Eye Bolts & small karabiner, washers & nuts 150mm Bolts, washers & nuts 150mm Eye Bolts & large karabiner, washers & nuts 990mm Chain 1140mm Chain www.zest4leisure.co.uk...
  • Page 3 Please take a few moments to check all pack contents listed. Assembly requires 2 persons. Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Socket Set, Hammer, 3mm Drill Bit required in order for you to drill all screw holes before construction. Position 2no Legs A either side of Beam B (See Fig.1a), align bolt holes and attach using 1no 150mm Bolt, washer &...
  • Page 4 www.zest4leisure.co.uk...
  • Page 5 www.zest4leisure.co.uk...
  • Page 6 www.zest4leisure.co.uk...
  • Page 7 Tools required: Corded / Cordless Drill, 8mm Drill Bit, Adjustable Spanner, Pozi-drive Bit / Screwdriver, 3mm Drill Bit required in order for you to drill all screw holes before construction. The colour version of this document can be downloaded from: www.zest4leisure.co.uk/downloads/category/C1 Hollywood Swing with Canopy Pack List Item Description Quantity Brackets...
  • Page 8 Position canopy onto beam of swing assembly, drill 8mm holes in beam (through brackets) and fix using 3no 70mm bolts. (See Fig. 3) Fully tighten all nuts*. *Nuts may need re-tightening periodically dependent on weather conditions. Hollywood Swing with Canopy is now complete.
  • Page 9 www.zest4leisure.co.uk...