1. Manuals
  2. Brands
  3. Sensiblue Manuals
  4. Water Dispenser
  5. S315
  6. Installation use and service manual

Sensiblue S315 Installation Use And Service Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Sensiblue Model S315


Installation, Use and Service Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S315 and is the answer not in the manual?

Questions and answers

Related Manuals for Sensiblue S315

Summary of Contents for Sensiblue S315

  • Page 1 Sensiblue Model S315 
 Installation, Use and Service Manual...
  • Page 2 TABLE OF CONTENTS Thank you for your purchase of Sensiblue Model S315, if installed properly the Sensiblue may provide you with safe disinfected drinking water for years to come! Please remind yourself to check regularly if the LED still is green, for proper disinfection.

  • Page 3: Installation Overview

    INSTALLATION - OVERVIEW Preparation Though you may be able to install the Sensiblue yourself, we recommend using a local certified installer to install it according local regulations. Make sure you keep enough space around Sensiblue to replace salt container as mentioned in Fig. 1.

  • Page 4: Installation Steps

    2 wrenches, on the Sensiblue a wrench size 30 and another wrench on the fitting you screw into the Sensiblue, as seen in Fig. 5 - on the right. Prevent any mechanical stress on the internals of the Sensiblue.

  • Page 5: Service And Maintenance

    You need to refill the Salt container. Refilling Salt container ‣ Close the valves upstream of the Sensiblue (Page 3, Valves A & C) in your water circuit. ‣ Open one of the downstream taps (Page 3, Taps I or II, etc) to release water pressure.

  • Page 6: Product Specifications

    PRODUCT SPECIFICATIONS Sensiblue Model S315 Max. capacity Approximately 15 L/min; 900 L/h Approximately 3 L/min; 180 L/h Min. flow for disinfection Max. water pressure 8 bar; 116 PSI Min. water pressure for disinfection 0,2 bar; 3 PSI 15 to 30 gr/m3...

  • Page 7: Problem Solving

    Sensiblue. ‣ If there is no air inside the Sensiblue, and you still taste salt water, we advice you to add a small (minimum 5L.) storage tank of water downstream of the Sensiblue, the small amount of salty water will be diluted in the tank.
  • Page 8 Nothing in this manual represents any contractual or other commitment on the part of Sensiblue and should not be taken as such. All possible care has been taken in the preparation of this publication. Contact Sensiblue for suggestions for improvement.

Table of Contents