Summary of Contents for Priolite LED 400
- Page 1 LED 400 Instruction manual Instruction manual LED 400 PRIOLITE GmbH / Gattingerstr. 7 / D-97076 Würzburg / Tel +49(0)931 20700000 / eMail info@priolite.com / http://www.priolite.com...
- Page 2 Technical data are subject to change. No guarantee for misprints. The listed values are guide values and should not be understood as binding in a legal sense. The values can differ due to tolerances in used components. PRIOLITE GmbH Wuerzburg - Last revised: 10/2012 - Page 2...
-
Page 3: Table Of Contents
Maintenance ......................11 Regular inspections and repairs ................11 Return to customer service ..................11 Disposal ........................11 Accessories ....................... 11 Cover page. Contact data ......................12 Declaration of conformity ................... 12 PRIOLITE GmbH Wuerzburg - Last revised: 10/2012 - Page 3... -
Page 4: Introduction
Special emphasis was placed in the selection of the LEDs regarding the color rendering index RA. The LEDs used by PRIOLITE have a RA index of 95 and thus, provide a phantastic color correctness. All PRIOLITE lightformers can be attached to the LED 400 light. -
Page 5: Intended Use
Intended use. The LED 400 battery-powered continuous video light is intended for mobile applications in the context of professional photography as well as film and video, in the studio or on- location. The LED continuous video light is designed for lighting of photography, film and video recordings, and must not be used for any other purpose. -
Page 6: Specific Safety Precautions When Working With Lithium-Ion Batteries
Respiratory system: Ensure fresh air supply. If necessary, perform first aid measures. In any case, following first aid measures a doctor should be consulted. Lithium-ion batteries must be only recharged with the supplied PRIOLITE charger (58V charger). The charge should be performed only under supervision and not in close proximity to combustible materials;... -
Page 7: Technical Specifications
Set-up and assembly The LED 400 continuous video light is equipped as standard with a tilting head. For set-up on tripods, pantographs or ceiling systems, this is screwed securely onto the appropriate tripod mount using the locking thumbscrew on the side of the panner. -
Page 8: Mounting Of Accessories
Due to the heat build-up, LED 400 continuous light unit must not be operated in the vicinity of flammable objects. Sufficient safety clearance with regard to decoration for photographic purposes must be ensured. -
Page 9: Starting-Up
Instruction manual PRIOLITE LED 400 Starting up The LED 400 continuous video light is switched on and off by pressing the main switch protected by a flap against unintentional switching. Before each operation, the black plastic transportation cap has to be removed. -
Page 10: Functions On The Operating Panel
Instruction manual PRIOLITE LED 400 An exchange drawer fitted with an original PRIOLITE battery (58V) is to be inserted completely into the opening of the LED 400 unit with slight pressure. To do so, use both hands and press index finger from reverse and thumbs against each other until the battery drawer clicks in. -
Page 11: Radio Function Box (Radio Operation)
For remote radio operation, use the three radio buttons on the right. If the ON button is activated (control LED lights up), the LED 400 continuous video light can be operated by radio. Additional settings for TEAM and ID are required. -
Page 12: Contact Data
EN 61000-6-3:2007, EN 61000-6-2:2005 and DIN EN 60335 according to the provisions of the Directives 2004/108/EG and 2006/95/EG Place and date of issue: Würzburg, 01-October-2012 Dipl.-Ing. Joachim Renschke Managing Director PRIOLITE GmbH PRIOLITE GmbH Wuerzburg - Last revised: 10/2012 - Page 12...
Need help?
Do you have a question about the LED 400 and is the answer not in the manual?
Questions and answers