Table of Contents
Advertisement
To see a graph vizualization of the measurement, press on the Stable Display
Area.
Graph Area
To activate the graph function, make sure that „Graph" is selected in „Display"
menu on the main screen. Individual graph settings can be made in „Graph Para-
meters" menu which is located in Main Menu -> Chamber Settings.
To analyze a graph in more details or full-screen mode, simply press on the graph
area
The following parameters are available as a graph:
•
Y-Axis
- Blue color: Water Activity (or %rH, depends on Settings).
- Red color: Temperature.
•
X-Axis
- Measurement time: Measurement time in minutes, intervall can be set
in „Graph Parameters" in „Chamber Settings" menu. The current
intervall is displayed just above the graph.
3.1.3 Audit Trail Area
The last few events of the day are displayed in this area. Press on the audit trail
area to see the complete audit trail and to be able to filter certain events, inclu-
ding last masurement results.
Every entry consist of the follwing data:
•
Date and time: Time Stamp when the event was logged.
•
Indicating Event letter in bracket:
(U): User Events.
(P): Parameter Changes.
(E): Errors.
(S): System Events.
(R): Measure Results.
•
Log Description: Short info and description about the event.
3.1.4 Function Key Area
In this area, the following main control buttons are accessible:
•
Sample Database: Load a specific method from sample database or adminis-
trate it.
•
Start/Stop: Start or Stop a measurement. The actual status is displayed in the
button itself.
•
Help: The button with the question mark is the entry to this help menu.
•
Main Menu: Access to main menu with all the „chamber setting" and „sys-
tem setting" options.
•
Log-off: Log-off current user / lock instrument. A new log-in might require a
user password, if one has been programmed.
www.novasina.ch
9
Hide quick links:
Advertisement
Table of Contents
