Advertisement
Advertisement
Table of Contents
Summary of Contents for Paul Wegener DS1/420
- Page 1 Operating manual Data acquisition system PWBlogg Pressure transducer DS1/420...
- Page 2 Paul Wegener GmbH...
- Page 3 Operating manual of data acquisition system PWBlogg Description and use The pressure transducer DS1/420 converts the physical quantity pressure into an electric signal (4...20 mA) and is designed for use in gas explosive areas of zone 2. The pressure transducer with the ignition protection type nA is a non-sparking electrical resource with low power input subject to DIN EN 60 079-15.
- Page 4 Paul Wegener GmbH Maintenance and troubleshooting PWB pressure transducers are maintenance-free. The recalibration cycle depends on the operati- onal conditions. Devices which are designed for use in explosive areas must not be modified. Device repairs must only be carried out by skilled and authorized specialists.
- Page 5 Operating manual of data acquisition system PWBlogg EU-DECLARATION OF CONFORMITY For the following product: Pressure transducer DS1/420 is herewith confirmed that this one complies with following EU directives: EMC directive 2014/30/EU Ex-protection directive ATEX 2014/34/EU And developed and examined based on following standards: EN 61000-6-3:2011-09 subject basic standard for emitted interference –...
- Page 6 Paul Wegener GmbH...
- Page 7 Operating manual of data acquisition system PWBlogg...
- Page 8 Paul Wegener GmbH Paul Wegener GmbH Marienstraße 24 D-06493 Ballenstedt Tel.: +49 (0) 39483 96 300 Fax: +49 (0) 39483 96 400 Internet: www.paul-wegener.de e-mail: info@paul-wegener.de PWB FORM 6033-EN16...
Need help?
Do you have a question about the DS1/420 and is the answer not in the manual?
Questions and answers